What size is a 1 5/16 socket?

A 1 5/16 standard size socket is 33.34mm which is a little bit bigger than a 33mm socket but it is the standard size socket that best fits over a 33mm bolt. Unless the 33mm nut or bolt that you need to remove is rounded a 1 5/16th socket will work.

Can I use the conversion chart to check socket size?

You can quickly use the conversion chart to check your metric socket size against your SAE socket size and vice versa.

What size socket do I need for a 3/8 drive?

Usually, you want to use with a socket size 12mm or smaller (but up to 14mm for low torque applications). 3/8″ Drive The most versatile and useful drive size for most people. Use it for engine work or all-purpose use around your home.

How to find the size of sockets and drives?

We have discussed the sizes of drives and types of sockets. You can check the size of sockets in the metric as well as in the SAE system. Also, you can find a conversion chart for converting the sizes into the desired unit type. This way, you can sort the sockets the way you want and save some time while doing the job.

What is the same size as a 5’8 socket?

SAE to Metric Conversion ChartSAE SizeMetric SizeInches Decimal9/16″0.56315mm0.59119/32″0.5945/8″0.62547 more rows•Apr 17, 2021

What is equal to a 5/8 socket in metric?

16mmSTANDARD / METRIC WRENCH CONVERSION CHARTBOLT DIAMETERSTANDARDMETRIC7/16″5/8″16mm1/2″3/4″19mm9/16″13/16″21mm-7/8″22mm39 more rows•Dec 15, 2020

What is the same as a 5’8 wrench?

Whatever the case may be, our wrench conversion chart will give you the best-fitting standard or metric wrench for a given bolt size….SAE & Metric Wrench Conversions.SAE Wrench SizeBolt Size (SI)Metric Wrench Size5/8″7/16″16 mm3/4″1/2″19 mm13/16″9/16″21 mm7/8″9/16″22 mm6 more rows•Jun 5, 2019

What does 5/8 convert to in MM?

15.88 mmConversion table inches to mmDimensions — Inches to Metric0.625”5/8”15.88 mm0.688”11/16”17.48 mm0.750”3/4”19.05 mm0.813”13/16”20.65 mm21 more rows

What size socket is between 5/8 and 9 16?

Six Point Standard Sockets (3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Six Point Metric Sockets (9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21) Six Point Standard Deep Sockets (1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1) Six Point Metric Deep Sockets (15, 16, 17, 18, 19, 21, 22)

Is a 16 mm wrench the same as 5 8?

Registered. yup, 16mm = 5/8″, and it’s so close that 8mm = 5/16, too!

What size Bolt uses a 5’8 wrench?

Hex Bolt, Lag Bolt, Square Bolt and Heavy Hex Bolt.US BoltsBolt Diameter (in)Head and Wrench Size (in)1/23/47/89/1613/165/815/161 1/1616 more rows

What size nut goes on a 5’8 bolt?

US Nut Size TableSizeDiameter*Hex NutMachine Screw Nut1/2″3/4″-9/16″7/8″-5/8″15/16″-17 more rows

Why Do You Need Socket Sets?

Sockets are generally used to tighten or loosen different fasteners. They can be an alternative to the conventional wrench if you know their usage. Most DIY enthusiasts and mechanics prefer having a set handy.

What are the different sizes of sockets?

Sockets follow two different sizes. There are SAE-sized sockets and metric sockets. The sizes are often used interchangeably. Knowing about both is important if you need to use your sockets regularly.

Why do you need multiple sockets?

One of the main benefits of having a socket set is versatility. If you’re dealing with a tight fastener, having multiple sockets can be beneficial. Also, it provides better grip when compared to wrenches.

Why are point sockets so expensive?

Point sockets are slightly more expensive than regular ones. Mostly due to the fact that they’re available in a lot of sizes together. If you’re planning to spend, point sockets are a good idea.

How many types of sockets are there?

Now that we’ve discussed the types of socket drives, let’s discuss the types of sockets. There are two common types of sockets available. The use of sockets has changed a lot over the years.

What is the largest drive?

The largest drive available is the ½” drive. Generally used for heavy jobs, they’re a must-have in any mechanics workstation. You’d see these drives in 19mm socket sizes often. They’re generally used in mounting TVs or fixing shower vents.

What is the most common socket?

If you’re new to using sockets, point sockets are the way to go. The most common point socket is the 12-point socket. The biggest benefit of the 12-point socket is that it’s easy to use. Simply slip the socket over any of the 12 positions and you’re set.

What is the difference between standard sockets and metric sockets?

Standard sockets are measured in inches while metric sockets are measured in milimeters (mm). Depending on the region you live in, one measurement system will be more common than the other. This can become frustrating because different manufacturers also embrace different measurement systems.

What is the size of a 33mm socket?

A 33mm metric socket is 1.29921 inches in size which most closely matches a 1 5/16 standard size socket. A 1 5/16 standard size socket is 33.34mm which is a little bit bigger than a 33mm socket but it is the standard size socket that best fits over a 33mm bolt.

What is a 36 mm in standard size?

A 36mm socket is 1 7/16″ in standard (SAE) size, almost. 1 7/16″ converts into so a 1 7/16 socket is the standard socket that best fits a 36mm fastener.

Do metric sockets match standard sockets?

Some metric sockets, like the 32mm socket, do match exactly with a standard sized socket so you see why switching between the two systems can be frustrating. Some fit, some don’t, and remembering what fits what can be difficult. Tip: Keep your sockets neatly organized from smallest to largest so that you can quickly test fit alternate sizes.

Why is a 6 point socket better than a 12 point socket?

It is thought a six-point socket will be more durable than a 12-point because its inner walls are set against all six sides of the hardware.

What is a 12 point socket?

A 12-point socket is convenient and easy to use. You can slip it over the hardware in any one of 12 positions, which makes it easier to align.

What is the drive on a socket wrench?

The drive on your socket wrench is the square section sitting on the ratchet. Certain sizes accept a varying number of sockets that can be either metric and SAE.

What are some examples of impact sockets?

Impact sockets are made in such a way they work with these other tools. A prime example is an electric or pneumatic impact wrench. If you use these, you will need a socket sets built to withstand these higher torques.

What size drive is used for low torque?

1/4” Drives: You find these used for low-torque work and are usually for smaller sized sockets possibly up to around 14mm as a maximum.

Can you use the conversion chart to check your socket size?

You can quickly use the conversion chart to check your metric socket size against your SAE socket size and vice versa.

Can you use different sizes of sockets?

While you have a large number of metric and SAE standard socket size, you can have differing wrenches to use these.

What is a drive socket?

You can think of a drive socket as the hole (square) for attaching the socket to a turning tool like a wrench or a ratchet. There are three commonly found standard sizes according to what you need it for. Here are the common sizes:

What is a shallow socket?

The shallow socket is the other name for a normal socket. In some cases, it might not touch the nut before the bolt hits the end of the socket, which makes the job hard and sometimes not doable. In such cases, mechanics use deep sockets.

Why do people use impact sockets?

Impact Sockets: Most of the time, people prefer hand tools. It’s because they are old school and have a sturdy build. However, most socket types don’t attach with such tools. And this is where impact sockets come into the picture. Impact sockets are specially designed to fit in such tools.

What is a 12 point socket?

The 12-point sockets are usually meant for light household tasks. However, there’s another category to this socket known as a 6-point socket. The 6-point socket is used for heavy jobs that require the application of heavy or substantial torque.

Can you check the size of a socket?

However, the above information is enough to enlighten you. We have discussed the sizes of drives and types of sockets. You can check the size of sockets in the metric as well as in the SAE system. Also, you can find a conversion chart for converting the sizes into the desired unit type. This way, you can sort the sockets the way you want and save some time while doing the job.

Can you use a deep socket in a car?

Usually, measuring one inch in length, you can use deep sockets in inaccessible places. You can do this only if your driver has an extension.

Can you arrange sockets based on size?

Arranging or sorting your sockets based on the size may sound easy. But it is not. Especially when there are two measurement standards, SAE and metric, which you need to keep in mind. However, if you just bought your set of sockets, we can help you arrange them

What size wrench do you use for a 5/16 bolt?

If you, for example, have a nut with a 5/16″ (ANSI or Imperial units), and you have a wrench in metric units, you will have to use an 8mm wrench to tighten it. This is what the SAE to Metric conversion char shows.

What is a ratchet drive?

The drive size on a ratchet (aka: socket wrench) is the small square connection fitting at the end of the ratchet. This fitting accepts sockets of the same size. There are 3 common ratchet drive sizes used in shops and home garages, but other drive sizes also exist.

Do you own sockets?

You may already own some socket or a set. Most likely, you are missing one or more sizes, and you need to get them to complete the set. Just down below, you will find reference charts so you can quickly find out which socket sizes you are missing. They are also sorted by size, from smallest to largest.

Do you need all sizes of sockets?

Pro Tip: Don’t expect any set to have absolutely all sizes from the chart list, and you will never need all of them. So, consider your tooling needs first to determine which sizes you need to be present in the socket set.

What is the most common socket used in the United States?

The three most often used sockets in the United States of America are the E12 (candelabra), the E26 (medium), and the E39 (mogul). As indicated in the table, there are several sockets that fall between these sizes. These three types of lighting are the most frequently used in traditional lighting.

What is a bipin socket?

A bipin or bi-pin (sometimes referred to as two-pin, bipin cap or bipin socket) is a type of lamp fitting. They are included in the IEC standard “IEC 60061 Lamp caps and holders together with gauges for the control of interchangeability and safety”. They are used on many small incandescent light bulbs (especially halogen lamps), and for starters on some types of fluorescent lights.

Why do fittings have different bases?

Light bulbs have to fit snugly into light fixtures, so they are designed with different bases. The light bulb base has to match the socket in the light fixture. If light bulb bases were standardized, light bulbs could be interchangeable across many fixtures. However, light bulb bases are not standardized. This is to prevent dangerous light bulbs from being used in light fixtures that aren’t designed for them. Light fixture sockets have a grip on the inside of the socket, and light bulb bases have a matching metal tab on the outside of the base. A light bulb with no grip can be inserted into any kind of light fixture, but it won’t stay in place because the grip and tab don’t match up. This is why light bulb bases aren’t standardized: if they were interchangeable across light fixtures, people would risk inserting a light bulb into sockets that weren’t designed for them.

What is the smallest light bulb base?

The smallest light bulb base is G4 with a diameter of 4 mm.

What is the diameter of an E-10 bulb?

In the lamp base designation “E-10” (sometimes called Miniature Edison Screw (MES), “E” stands for “Edison” and “10” indicates the diameter in millimeters as measured across the peaks of the thread on the base, e.g., E-10 base bulbs have a diameter of 10 mm. E-10 base light bulbs have a single contact on the bottom and are used in flashlights, indicators, and toys.

How many thread sizes are there in a mains supply lamp?

For mains supply lamps, there are four thread size groups that are typically used:

Do linear fluorescents have a single pin?

Some linear fluorescents have a single pin Fa8, but they are not very common.

What Size Wrench Is Bigger Than 3/4?

Here is more information on the standard size of wrenches in your tool box. The wrench set sizes chart here has both inches and mm and can be used as an open-ended wrench size chart and your box-end wrench size chart together. (Read Light Bulbs Types)

Can you mix metric and SAE nuts?

When working with SAE and metric nuts and bolts, you can mix and match socket sets, or you need an SAE to metric size wrench conversion chart for the mm to SAE equivalent for all the sockets you need. (Read Spark Plug Wrench Sizes)

Most Common Drive Sizes

• You can think of a drive socket as the hole (square) for attaching the socket to a turning tool like a wrench or a ratchet. There are three commonly found standard sizes according to what you need it for. Here are the common sizes: 1. 1/2″ Drives: Such drives are mostly used for heavy jobs where the nuts are massive and need more force or torque. ½…

See more on electronicshub.org

Types of Sockets

Shallow vs. Deep Sockets

SAE to Metric Conversion Chart

Final Words