What makes Polaris 4-stroke oil different?
The workhorse of any 4-stroke engine oil is its additive system, and this is one of the main differences between POLARIS engine oils and aftermarket products. The POLARIS proprietary additive system in PS-4 and PS-4 Extreme Duty is designed to meet or exceed the latest industry wear and protection standards.
What is a good substitute for Polaris PS-4 oil?
I found here and on other sites, the AMSOIL Formula 4-Stroke Powersports 0W-40, Code AFFAT-EA is suggested as a replacement. Polaris PS-4 is $12/qt and this AMSOIL stuff is $12.65/qt. I use Rotella T-6 in my Yamaha 4-wheeler ($22/gallon). I was able to find the technical properties for the two and they are similar.
What kind of oil do you put in a Polaris ATV?
AMSOIL Synthetic 10W-40 ATV/UTV Engine Oil – Ideal for any ATV or Side By Side requiring a 10W-40 oil for engine or engine/transmission combinations. AMSOIL Synthetic 5W-50 ATV/UTV Engine Oil – An exceptional oil for all Polaris 4-stroke ATVs, Side By Sides and UTVs.
Why choose Polaris off-road oil?
Our proprietary additive system is designed specifically for Polaris Off-Road Vehicles to reduce engine wear, optimize engine cleanliness, and deliver industry leading corrosion and storage protection. Another key component to our engine oils is our wide all-season 5W-50 viscosity range.
What kind of oil is Polaris PS4?
POLARIS EXCLUSIVE CLEAN ENGINGE ADDITIVE SYSTEM: Significantly reduces engine deposits to help maintain peak power and performance. OUTSTANDING PROTECTION AND PROVEN PERFORMANCE: PS-4’s unique wide 5W-50 viscosity range provides critical engine in all seasons.
Do you have to use Polaris oil in a Polaris?
Any claims an aftermarket oil manufacturer makes that its product meets Polaris engine requirements are false. They may have tested their oil in Polaris vehicles but not to the level that we test at and without the knowledge of our engine oil requirements. We only follow one performance standard — our own.
Who makes PS-4 oil?
PolarisCompared to other leading oil brands the Polaris Engineered PS-4 Engine Oil lasts much longer. The higher the oxidation stability the longer the oil life. Polaris proprietary additive system resists negative effects of oil oxidation longer than leading aftermarket and automotive engine oils.
What kind of oil can I use a Polaris Ranger?
2.5 Quarts of PS-4 Full Synthetic 5W-50 Engine Oil.
Can I use car oil in my Polaris ATV?
To answer the question more bluntly, using automotive oils can eventually damage an ATV/UTV engine/clutch/transmission or, in some extreme cases, even eventually lead to catastrophic failure and an expensive repair bill.
Can you put car oil in a four wheeler?
You can use automotive oil in an ATV or UTV if needed. But it’s not always recommended. Your best option is to use synthetic car oil, in 10w-40 weight, if you have to. But oils made specifically for ATVs, Motorcycles and UTVs are your best bet as they are engineered to protect those smaller engines.
What is Polaris angle drive fluid used for?
Polaris Angle Drive uses the latest generation antiwear additive technology to protect against interfacing gear wear, corrosion and oxidation caused by sustained high temperatures. Maintaining drive quality. The proprietary formula provides proper lubrication to critical components of angle drive gear systems.
What kind of oil does a Polaris 570 take?
The recommended oil for the 570 is 5W50 synthetic.
What kind of oil does a Polaris Ranger 500 take?
Polaris PS-4 Full SyntheticThe recommended oil is Polaris PS-4 Full Synthetic, which is part number 2876245 for 1 gallon and part number 2876244 for 1 quart. Polaris Oil Change Kits come with the correct amount of oil for your vehicle. The oil change kit for a RANGER 500 is part number 2202166. Note: Do not overfill.
How often should you change oil on Polaris Ranger?
Perform a break-in oil and filter change at 25 engine hours or one month of use — whichever comes first. Following break-in, change your oil and filter every 100 hours, six months or 1,000 miles — whichever comes first.
What kind of oil does a Polaris 1000 XP take?
Polaris PS-42.5 Quarts of Polaris PS-4 Full Synthetic 4-Cycle Engine Oil.
What kind of oil does a UTV use?
5W-50 Synthetic ATV/UTV Engine Oil.
What oil does a Polaris ATV take?
2 quarts of PS-4 Full Synthetic 5W-50 Engine Oil. 1 Polaris Oil Filter, # 2520799.
Can I use 5W 30 in my four wheeler?
It is advised to respect it. The engines are machined so that the chosen viscosity is most effective. In the example recommendation above, the manufacturer requires grade 10w30, so depending on the start temperature, 0W30, 5W30 or 10W30 would be good choices.
What kind of oil does a Polaris Sportsman 850 take?
5W-50 viscosity grade recommended for use in ambient temperatures of -40°F to 100°F.
What oil does a 2013 Polaris Ranger take?
2.5 Quarts of Polaris PS-4 Full Synthetic 4-Cycle Engine Oil.
Which is better, Mobil One 5W50 or 15W50?
That being said, the Mobil One 5w50 is a fine oil and would likely work well. The Mobil One 15w50 has better zinc and phosphorus numbers and would be better IMO if you don’t regularly ride in very cold conditions.
Is Polaris 0w40 good?
Polaris engines and transmissions are very robust. Ive been running 0w40 in my four stroke Polaris without issue in the extreme Florida heat.
Is Polaris hard on oil?
I think the Polaris engines aren’t hard on oil, no more so that a normal car engine. Polaris engines don’t have wet clutches or integral transmissions which means that the oil for the engine only has to lubricate the engine, an easier job for oil than other ATV applications.
What oil do you use for Victory?
Most of the Victory oil change kits are expensive. The oil is a synthetic blend. Most of the bike owners have started to use the diesel dino 15w-40 (shell rotella,delvac,etc.), synthetic 5w-40 (shell rotella), and 20w-50 (dino and synthetic) with no problems.
What oil does a Victory use?
I own a Polaris/Victory motorcycle, which uses 20w-40. Most of the Victory oil change kits are expensive. The oil is a synthetic blend . Most of the bike owners have started to use the diesel dino 15w-40 (shell rotella,delvac,etc.), synthetic 5w-40 (shell rotella), and 20w-50 (dino and synthetic) with no problems. Performance is just as good or better with a shared sump, cooling, shifting, and oil usage. No clutch problems, as long as a person stays away from the gas conserving additives and oils.
How much oil does a crankcase hold?
Crankcase holds 2.25 quarts of Polaris PS-4 Performance Synthetic 4 Cycle Oil. Will check the mentioned oil and sites.
Does Polaris have a shared transmission?
Polaris does not have shared engine/transmission. The last time I bought one was in 1999, It was a sportsman 500. I beleive they are still the same basic set up, just bigger and more powerful. The engine oil would hold 2.25 qts (with filter) and the transmission held like 20 onces, I think. I still have a Explorer 400L and a Trailblazer, but they are both two strokes, which is a different animal.
About Polaris AGL
The Polaris AGL is a superior quality lubricant designed to maintain ultimate performance for Rangers and off-road vehicles with RPMs. The manufacturer uses advanced technology to formulate AGL’s additive system to protect critical transmission components from regulating moisture.
Polaris Transmission Oil Substitute
Using OEM or aftermarket products is a question that has been raised in the automotive community for a time. I also can find it is one of the biggest debates on many forums.
Final Verdict
These are the three Polaris Transmission Oil substitutes I found to be powerful and efficient. I base my recommendation on the information regarding these substitutes.
What is Polaris engine oil?
Polaris Engineered Lubricants products are formulated to work specifically in Polaris vehicles. Polaris Engineered Lubricants works directly with Polaris engineering teams to formulate, test, and validate each oil in the most extreme dyno and field conditions. Each fluid is specifically developed and tested to meet Polaris engineering’s tolerance and wear limitations. With over two million miles of field validation and hundreds of thousands of hours on our dyno machines, we can say that we have the best oil available for Polaris Off-Road Vehicles.
What is the 5W-50 oil?
Another key component to our engine oils is our wide all-season 5W-50 viscosity range. The five weight is the winter grade, allowing easy starts and instant oil flow in conditions down to minus 40 degrees Fahrenheit. The 50 weight is the oil’s level of strength or film protection in high heat and high stress conditions. PS4’s high quality powersports grade viscosity modifier is designed to resist shear caused by high RPM and heat cycles, keeping your oil in the proper protection grade longer than typical aftermarket oils.
What is aftermarket oil?
Aftermarket engine oils claim they work across a broad range of engine and vehicle applications, from motorcycles to off-road vehicles. What works for one vehicle may not be the best for Polaris vehicles. The Polaris engineering team tests over 3,000 oil samples annually.
What is the best oil for an ATV?
AMSOIL Synthetic 10W-40 ATV/UTV Engine Oil – Ideal for any ATV or Side By Side requiring a 10W-40 oil for engine or engine/transmission combinations.
What is AMSOIL 4 stroke oil?
AMSOIL Formula 4-Stroke 0W-40 Synthetic Motor Oil – Suitable for most motorcycle ATV/UTV/Side-by-Side applications. This shear stable, all-climate formula replaces everything from 2W-50, 5W-50, 5W-40 10W-30 and everything in between.
What is AMSOIL dominator?
AMSOIL Dominator Synthetic Racing 2-Stroke Oil – For racing or highly modified two-stroke engines only. Not suitable for stock engines or anything less than competition-level operation.
What is AMSOIL lubricant?
AMSOIL Synthetic ATV/UTV Transmission/Differential Oil – A full synthetic 75W-90 gear lube that can be used in transmissions and differentials of ATV and Side By Side . Meets API GL-5 requirements.
How to contact AMSOIL for motorcycle oil?
If you still have questions, contact us using the form on your upper right or call us at 1-800-748-5781.
What is the best oil for a dirt bike?
AMSOIL Synthetic 10W-40, 10W-50 and 10W-60 Dirt Bike Oil – The motorcycle oils from this dirt bike series are designed for racing and/or extreme operation. World-class gear protection and steadfast clutch preservation (even under professional racing conditions) makes these oils ideal for any 4-stroke engine or gearbox. Note that the 10W-40 Dirt Bike version is expressly suggested for many transmission applications. The Dirt Bike series is also highly suitable for street bikes, road racing, and supermoto.
What is a 75W-140?
AMSOIL Severe Gear 75W-90, 75W-110 or 75W-140 – A premium full-synthetic gear lube series that provides outstanding performance and protection for motorcycle transmissions and gearboxes.
