- 2.00mm Connectors. Features. 2.00mm (0.079″) connectors with Moulded Locking Ramp. Mates with 2.00mm (0.079″) headers without polarisation. …
- FFC/FPC Connectors. Features. 2.50mm (0.098″) Housing. Accepts 2523 series terminal. …
- 2.54mm Connectors. Features. 2.54 x 2.54mm (0.100 x 0.100″). For PCB Solder.
What are the common uses of a JST connector?
JST connectors are used in many types of products, and commonly used by electronics hobbyists and consumer products for rechargeable battery packs, battery balancers, battery eliminator circuits, and radio controlled servos.
What is the difference between JST and VH connectors?
Like the above series, also surface mount only however featuring positive latching mechanism and a completely different type of mating surface. VH is a larger type of JST connector featuring positive latching and is generally used in high voltage and/or high current connections.
What are the smallest through-hole JST connectors?
ZH is one of the smallest pitch types of through-hole JST connector. Types smaller than this are all SMD. I am told these are common 3D printer related applications. Numbers in bold can be changed to order connectors with a different number of positions. SZH-002T-P0.5
What is a JST connector in servo amplifiers?
Servo amplifiers are used in industrial equipment to transmit electrical signals and control movement. The following JST connectors can be found in servo amplifiers: Going into this year, as a result of the Covid-19 pandemic, supply issues have been creating havoc everywhere.
What are the different JST connectors?
ContentsZH (1.5mm pitch)PH (2.0mm pitch)XH (2.5mm pitch)PA/XA (2.0mm / 2.5mm pitch)EH (2.5mm pitch)SM (2.5mm pitch)RCY (2.5mm pitch)SH/SR (1.0mm pitch)More items…
How do I know what JST connector I have?
JST connectors are mostly identified by the length between one contanct to the centre of another contact. There are always between two to higher contacts in a single line. Some families have multiple rows as well. This length is the pitch of the connector type and determines the family that the connector is a part off.
What does JST connector stand for?
Japan Solderless TerminalJST connectors are electrical connectors manufactured to the design standards originally developed by J.S.T. Mfg. Co. (Japan Solderless Terminal). JST manufactures numerous series (families) and pitches (pin-to-pin distance) of connectors.
What is a JST XH connector?
The JST XH series’ disconnectable, 2.5 mm (0.984”) pitch, crimp-style connector was developed based on the high reliability and versatility of their NH series connectors. The connector is very small with a mounting height of 9.8 mm. These wire-to-board connectors are typically used to bring power to a PC board.
Is Molex and JST same?
The Molex PicoBlade is a 1.25 mm pitch connector frequently confused with JST GH in the same pitch. This mystery “JST connector” has the 1 mm pitch of the JST SH, but the datasheet says it is too large to be one.
What are the 4 types of connectors?
The six levels of interconnection typically seen in electrical connectors.Board-to-Board Connectors.Wire/Cable-to-Wire/Cable Connectors.Wire/Cable-to-Board Connectors.
How do you crimp a JST connector?
1:158:02How To Crimp JST RCY Connectors – YouTubeYouTubeStart of suggested clipEnd of suggested clipIt’s fine for what I need and it’s got the two size crimps slightly larger one for the jst rcy pins.MoreIt’s fine for what I need and it’s got the two size crimps slightly larger one for the jst rcy pins. And then the smaller one is for the servo plug pins. Today these it’s pretty simple.
How many amps can a JST connector handle?
This is a small power connector and is commonly found on small models, toys and small lipo packs. JST connectors carry low currents (5 amps) and are most commonly found in on-board electrics such as servos, gyros, receivers and receiver switches.
How do I wire a JST connector?
0:000:55JST Connector Crimp – YouTubeYouTubeStart of suggested clipEnd of suggested clipHold the jst connection in your left hand and put it into the 1.6 millimeter slot with the innerMoreHold the jst connection in your left hand and put it into the 1.6 millimeter slot with the inner wings. And just hold it with the pliers. Then stick in the wire.
What is a DuPont connector?
“DuPont connector” is a vernacular term which refers to a number of different types of 0.1″ pitch connector. They feature black plastic housings which retain contacts with fingers built into the housing body. All are very similar in appearance but vary significantly in quality and price.
What are XT60 connectors?
The XT60 is a popular connector type that is found in almost all high-current lithium polymer batteries. These connectors can handle up to 30A and can be plugged in only one way, preventing the reverse connection.
What is a sm connector?
SM CONNECTOR 2.5mm Pitch Disconnectable Crimp Style. The SM series are 2.5mm (.098″) pitch, wire-to-wire connectors that perform. reliably in high-density, small current applications.
Is it possible to plug any cable into the wrong connector?
It may be possible to force a connector in wrong, but that will result in damage to the device. Four contacts – All USB connectors have at least four contacts (although some may have five, and USB 3.0+ connectors have even more).
What is a DuPont connector?
“DuPont connector” is a vernacular term which refers to a number of different types of 0.1″ pitch connector. They feature black plastic housings which retain contacts with fingers built into the housing body. All are very similar in appearance but vary significantly in quality and price.
How do you crimp a JST XH connector?
2:054:15How to crimp a JST XH Connector – YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you just squeeze it down till it holds it don’t squeeze it all the way. You’ll see it’s in thereMoreAnd you just squeeze it down till it holds it don’t squeeze it all the way. You’ll see it’s in there and on the other side it sticks out just a little bit see that.
How do I connect JST connectors?
0:000:55JST Connector Crimp – YouTubeYouTubeStart of suggested clipEnd of suggested clipHold the jst connection in your left hand and put it into the 1.6 millimeter slot with the innerMoreHold the jst connection in your left hand and put it into the 1.6 millimeter slot with the inner wings. And just hold it with the pliers. Then stick in the wire.
What is JST connector?
JST connectors are used in traffic systems and heavy electronics, such as railway vehicles and the equipment used to run transport stations. For example, the following parts may be found in an automatic turnstile: IC card control board: SR. Power supply board: VH, JFA.
Where are JST connectors found?
From airbags and headlights to ignition coils and data control modules, JST connectors can be found in almost every part of every automotive. These are just some of the connectors used in the industry:
What is servo amplifier?
Servo amplifiers are used in industrial equipment to transmit electrical signals and control movement. The following JST connectors can be found in servo amplifiers:
Why do companies rely on JST parts?
Having cutting-edge information and communication equipment is vital in today’s world. That’s why companies rely on JST parts to power devices such as laptops and smartphones, which may include:
When was JST founded?
JST has been a pioneer in the technology industry since 1957. Committed to
When will connectors be conformed to RoHS2?
The following products shall be also shifted one by one to the RoHS2 Compliance product by the end of March in 2019. In addition, “Compliant with RoHS” is described on each product catalog, the description will be sequentially changed to the “RoHS2 compliance”.
Is JST a force majeure?
Due to these continued circumstances, beyond our reasonable control, JST maintains the position that it may not be commercially or practically possible for us to continue to meet all customer expectations, thus putting us is in a Force Majeure position where JST cannot accept responsibility for line-down or other related supply chain costs.
Product Series
1.0mm pitch secure lock type connector. This low insertion force type connector realizes easier mating operation. The basic concept of the contact part of this connector is equivalent to the performance proven SHL connector.
NSH Connector
1.0mm pitch secure lock type connector. This low insertion force type connector realizes easier mating operation. The basic concept of the contact part of this connector is equivalent to the performance proven SHL connector.
Where is CJT Connectors factory?
In April 2013, CJT Connectors factory moved in DongGuan. In March, CJTconn has registered the trademark “CJT|CJTCONN” with OHIM (EU Intellectual Property Office) In February 2012, “CJTCONN” trademark was registered with the state administration for industry and commerce of the People’s Republic of China .
Where is Changjiang connectors made?
Founded in 1998, ChangJiang Connectors Co.,Ltd. is located in the most economically developed and strategic city-Shenzhen in Guangdong Province. ChangJiang Connectors is a professional leading manufacturer integrating molding development connector production and sales.
What is the patent for CJTconn?
At the beginning of 2018, CJTconn was awarded “The Design Patent of New Type Anti-Trip Connector” and “The Design Patent of Double Sided Front and Back Connector with Hole” by China Intellectual Property Office. In June 2017, CJTconn (Singapore) Connectors was established in Singapore.
Overview
JST connectors are electrical connectors manufactured to the design standards originally developed by J.S.T. Mfg. Co. (Japan Solderless Terminal). JST manufactures numerous series (families) and pitches (pin-to-pin distance) of connectors.
JST connectors are used in many types of products, and commonly used by el…
Connector soldering
A majority of JST through-hole headers can’t withstand the temperatures required for reflow soldering, because the plastic has a lower melting point since they were designed for wave soldering methods. Some JST surface-mount headers are designed to handle higher temperatures of reflow soldering.
Connector confusion on the internet
End-users and 3rd-party sellers on eBay often describe connectors by their wrong name thus perpetuating confusion of the exact series of a specific connector. It is very common in blogs and websites to incorrectly name a specific connector only by the name of the manufacturer.
To minimize confusion, it is best to describe a connector using: the manufacturer’s name, exact connector series, and optionally the pitch, such as “JST-XH” or “JST-XH-2.50mm” or “2.50mm JS…
Gallery
• JST PH 2-pin right-angle through-hole PCB.
• JST PH 2-pin right-angle surface-mount PCB.
• JST RCY 2-pin.
See also
• DC connector
• Electrical connector
• Pin header connector
External links
• Official website, top-level websites for 12 countries, such as America and UK.