Mobil Fluid 424 High Performance Tractor Hydraulic Fluid is an equivalent of the John Deere Hy-Gard oil specs JDM J20C. It flows well into the hydraulic system to greatly enhance the performance of your tractor. Its formation includes a combination of select base oils with extra additives.
What are the substitutes of John Deere hydraulic oil?
With that being said, let’s dive into the substitutes for John Deere hydraulic oil. Substitutes for John Deere Hydraulic Oil Before choosing the substitute oil, keep in mind that John Deere uses oils of viscosity 10W-30. MOBIL Fluid 424: Mobil Fluid 424 is a mineral oil-based fluid. The viscosity of this fluid is equivalent to around SAE 10W-30.
What type of oil does the John Deere use?
The oil in all John Deere lawnmowers with gas engines is 10W30. It is recommended to use 15W40 oil on diesel mower engines. If you do this service every time, you will need about two quarts of oil.
What kind of hydraulic fluid does a John Deere take?
What kind of hydraulic fluid does John Deere take? Hy-Gard transmission and hydraulic oil is a unique oil developed by John Deere engineers to meet the exact needs of John Deere machines. Hy-Gard fluid is a multi-viscosity fluid with a high-viscosity index.
What is the engine oil capacity for a John Deere?
Transmission oil capacity: 43.5 L (11.5 US. gal, 9.6 Imp. gal.) Transmission model: PowrReverser Plus: Transmission type – Gears: 24 forward and 12 reverse: Speed: Forward: 40.9 kmh (25.4 mph) Reverse: 44.0 (27.3 mph) Transmission oil capacity: 43.5 L (11.5 US. gal, 9.6 Imp. gal.) Tires: Front tires: Ag: 12.4-24: Rear tires: Ag: 18.4-30
What hydraulic fluid is used in John Deere?
What Does John Deere Recommend for Hydraulic Fluid?
What are My Tractor Hydraulic Fluid Options?
Why is it important to check the fluid level on a John Deere tractor?
What happens if you overfill your oil reservoir?
How to know what oil to use for a tractor?
Can you use Sapphire Hydraulics on a John Deere tractor?
See 2 more
What is the equivalent to John Deere hydraulic oil?
Low-Viscosity Hy-Gard replaces the John Deere All-Weather Hydrostatic Fluid and should be used as a direct replacement for all applications recommending hydrostatic fluid. Low-Viscosity Hy-Gard is compatible with hydrostatic fluid and can be added to systems, which contain hydrostatic fluid.
What viscosity is John Deere hydraulic oil?
Hy-Gard transmission and hydraulic oil is a unique oil developed by John Deere engineers to meet the exact needs of John Deere machines. Hy-Gard fluid is a multi-viscosity fluid with a high-viscosity index. Hy-Gard viscosity places it between ISO 46 and 68 grades.
What is equivalent to JDM J20C?
The J20D specification is the cold-temperature equivalent to J20C.
Who makes John Deere hydraulic oil?
Subject: RE: Who Makes JD Oil? Chevron formulates and packages John Deere Plus-50 and Northland makes the 0w-40 in the continental United States. In Europe it is made by Petro-Canada.
What weight is JD Hy-Gard?
Low Viscosity Hy-Gard Hydraulic and Transmission Oil, 32 oz. An exclusive formulation, specifically designed to protect John Deere transmissions, final drives and hydraulic systems.
Can I use 20w50 in a hydrostatic transmission?
For use in hydrostatic transmissions in zero turn, stand on and riding mowers requiring a high viscosity transmission fluid, either 20W-50 or 15W-50.
What weight is John Deere J20C oil?
SAE 10W Hydraulic Oil, TO-2 | Ultra1Plus™
What is J20C hydraulic fluid?
PRODUCT CODE: 3331. DESCRIPTION. 49 NORTH® TRACTOR HYDRAULIC FLUID (J20C) is a multifunctional type fluid formulated specifically for tractors using a centralized system to lubricate the transmission, differential, wet brake, power steering, and hydraulic systems.
What’s the difference between J20A and J20C hydraulic oil?
Petro-Canada Lubricants notes that the key difference between JDM J20A (which is replaced by the current JDM J20C or JDM 20D specification) is the addition of the Alli- son C-4 seal, oxidation, wear and frictional characteristics test requirements — a fact that is not commonly known.
Do I have to use John Deere oil?
A. Yes, it is the recommended oil for John Deere engines after the break-in period. As a reminder, for the first 100 hours (minimum), John Deere recommends Break-In Plus engine oil.
What grade oil is best for hydraulics?
Hydraulic equipment used indoors under normal service conditions generally use a conventional antiwear hydraulic oil with the appropriate viscosity. The most commonly used viscosities are ISO 32, 46, or 68, since these are able to lubricate and protect the system under the normal range of operating temperatures.
What weight is tractor hydraulic fluid?
Universal Tractor Hydraulic Fluid is a SAE viscosity grade 10W-30 and meets API GL-4 gear oil specifications.
What is the best oil for hydrostatic transmission?
The fluid recommended for Hydro-Gear transmissions and pumps is a 20W-50 motor oil or 15W-50 synthetic motor oil. If the machine has oil reservoirs, they are mounted to the frame behind the seat, for easy access and oil level check accessibility.
What is TGH fluid?
Universal Transmission, Gear, and Hydraulic Fluid Nemco TGH Fluids are multifunctional fluids formulated specifically for tractors using a centralized system to lubricate the transmission, differential, wet brake, power steering and hydraulic systems.
What Makes John Deere Hydraulic Oil Pricey?
In 1973, John Deere developed Hy Gard oil for ith equipment. Shortly after, it became the industry standard, thanks to the low-quality oils available in the market then. Of course, they have formulated more oils since then. However, John Deere’s Hydraulic oil remains pricey compared to the ones in the market.
John Deere Hy-Gard Transmission And Hydraulic Oil Equivalent
Unlike most of the other car fluids and oils, hydraulic/ transmission oil has no industry classification. Each manufacturer determines and establishes its minimum requirements for its equipment. John Deere Hy Gard oil meets and even exceeds most of these expectations.
Final Verdict
All the three fluids above are on top of the range for hydraulic fluids. They exceed the requirements, are high quality oils. Moreover, these products also have proven beyond doubt that they perform well and will easily give John Deere Hy Gard oil a run for its money.
What hydraulic fluid is used in John Deere?
The best hydraulic fluids for John Deere tractors are the ones which have been specifically designed for use in those machines. Whenever you use Hy-Gard or low viscosity Hy-Gard fluids, you can be certain that you’re getting the optimal performance from your machine, and that any excessive wear and tear will be prevented.
What Does John Deere Recommend for Hydraulic Fluid?
John Deere engineers have designed some very specific hydraulic oils which are intended to be used in their machines for optimal performance. Hy-Gard fluids have a high viscosity index and are multi-viscosity in nature. By contrast, low viscosity Hy-Gard has an ISO 32 grade of viscosity, as opposed to its cousin which has ISO 46 and 68 grades. Both these types of hydraulic oil were developed exclusively for John Deere equipment, although many other equipment owners make use of them for non-John Deere machines.
What are My Tractor Hydraulic Fluid Options?
Your options for refilling your John Deere tractor with fluid will hinge on one important question – what specific type of machine do you own? It’s to your advantage to know as much as possible about your tractor because you will be much better equipped to take good care of it, and to keep it operating at a high level for a long time.
Why is it important to check the fluid level on a John Deere tractor?
Checking the fluid level on a John Deere tractor is extremely important so that you can ensure full lift cylinder action as well as steering and drive action. You’ll also be able to better protect against any kind of damage to the hydro-static pumps, the hydraulic pump motors, the control valve, and the charge pump.
What happens if you overfill your oil reservoir?
If you do happen to overfill, it’s very possible that the oil might get blown out of the dipstick tube, and be introduced into the engine area.
How to know what oil to use for a tractor?
Once you know the particular weight of oil you need, you will have to decide between an ISO oil or an AW oil. Both of these have the same weights, but AW oil includes some elements which provide anti-wear capabilities, and that makes them somewhat superior to ordinary ISO oils. Although in some cases you may have to look to something more extensive like hydraulic cylinder repair.
Can you use Sapphire Hydraulics on a John Deere tractor?
Sapphire Hydraulics | October 30, 2019. You might think that almost any hydraulic fluid would be acceptable for use in your John Deere tractor. While your tractor would probably continue to perform without issues, it’s very likely that there would be a dropoff in performance, or that a little more wear and tear is introduced to the system.
What hydraulic fluid is used in John Deere?
The best hydraulic fluids for John Deere tractors are the ones which have been specifically designed for use in those machines. Whenever you use Hy-Gard or low viscosity Hy-Gard fluids, you can be certain that you’re getting the optimal performance from your machine, and that any excessive wear and tear will be prevented.
What Does John Deere Recommend for Hydraulic Fluid?
John Deere engineers have designed some very specific hydraulic oils which are intended to be used in their machines for optimal performance. Hy-Gard fluids have a high viscosity index and are multi-viscosity in nature. By contrast, low viscosity Hy-Gard has an ISO 32 grade of viscosity, as opposed to its cousin which has ISO 46 and 68 grades. Both these types of hydraulic oil were developed exclusively for John Deere equipment, although many other equipment owners make use of them for non-John Deere machines.
What are My Tractor Hydraulic Fluid Options?
Your options for refilling your John Deere tractor with fluid will hinge on one important question – what specific type of machine do you own? It’s to your advantage to know as much as possible about your tractor because you will be much better equipped to take good care of it, and to keep it operating at a high level for a long time.
Why is it important to check the fluid level on a John Deere tractor?
Checking the fluid level on a John Deere tractor is extremely important so that you can ensure full lift cylinder action as well as steering and drive action. You’ll also be able to better protect against any kind of damage to the hydro-static pumps, the hydraulic pump motors, the control valve, and the charge pump.
What happens if you overfill your oil reservoir?
If you do happen to overfill, it’s very possible that the oil might get blown out of the dipstick tube, and be introduced into the engine area.
How to know what oil to use for a tractor?
Once you know the particular weight of oil you need, you will have to decide between an ISO oil or an AW oil. Both of these have the same weights, but AW oil includes some elements which provide anti-wear capabilities, and that makes them somewhat superior to ordinary ISO oils. Although in some cases you may have to look to something more extensive like hydraulic cylinder repair.
Can you use Sapphire Hydraulics on a John Deere tractor?
Sapphire Hydraulics | October 30, 2019. You might think that almost any hydraulic fluid would be acceptable for use in your John Deere tractor. While your tractor would probably continue to perform without issues, it’s very likely that there would be a dropoff in performance, or that a little more wear and tear is introduced to the system.
