There is no specific substitute for xd100. On the other hand you can use a different grade oil such Evinrude xd50. A substitute for this oil can be a Quicksilver oil. The key to substitute oil is the TC-w3 certification.
What is the difference between Evinrude xd50 and xd100?
The Evinrude/Johnson TCW3 oil is conventional base. The XD100 seeting on the ETEC engine does not mean the engine is running a 100:1 ratio, but rather the engine is set to consume the XD100 oil. My understanding is that XD100 means 100% synthetic. XD50 is a synthetic blend. The Evinrude/Johnson TCW3 oil is conventional base.
What does xd100 oil do?
Use XD100 to ensure long engine life, durability and reliability in Evinrude E-TEC G2 and Evinrude E-TEC outboards. XD100 maintains engine power and acceleration by reducing combustion deposits and friction. Designed specifically for Evinrude outboards, the synthetic formula delivers maximum engine performance with uncompromising lubrication.
Can I use HP Marine™ instead of Evinrude xd100 in my engine?
AMSOIL fully supports the use of HP Marine™ as a replacement for Evinrude XD100 in Evinrude E-TEC™ engines, and warrants its use according to the AMSOIL Limited Liability Warranty (G1363). Deposits on the piston rings can cause ring sticking and consequent power loss.
What kind of oil do you put in an Evinrude engine?
AMSOIL HP Marine Synthetic 2-Stroke Oil provides excellent protection in Evinrude E-TEC marine engines programmed to the lean-mix setting. Evinrude® E-TEC™ marine engines are unique in that they offer an alternative, lean-mix setting that allows the engine to use less oil.
What is Evinrude E-TEC oil?
What percentage of oil is perfect in cylinder bore scuffing?
Can you use XD100 oil on Evinrude?
Does undercrown oil cause preignition?
What oil is compatible with XD100?
Results prove the effectiveness of AMSOIL HP Marine Synthetic 2-Stroke Oil in Evinrude E-TEC applications. AMSOIL fully supports the use of HP Marine™ as a replacement for Evinrude XD100 in Evinrude E-TEC™ engines, and warrants its use according to the AMSOIL Limited Liability Warranty (G1363).
Who makes Evinrude XD100 oil?
Johnson Evinrude XD100 2-Cycle Synthetic Oil.
What oil can I use in my ETEC?
Use XD100 to ensure long engine life, durability and reliability in Evinrude E-TEC G2 and Evinrude E-TEC outboards. XD100 maintains engine power and acceleration by reducing combustion deposits and friction.
What is a substitute oil for xd50 oil?
Any tcw3 made for DI engines will work for xd50.
Is Synthetic 2 Cycle oil better?
Synthetic oil has proven to be best for 2-stroke engines.
Who makes Evinrude 2 stroke oil?
Johnson-Evinrude XD30 2-Cycle Conventional Oil.
Is an Evinrude ETEC a 4-stroke?
The technology is considered 2-Stroke, Direct Injection. Evinrude E-TEC in fact, has cleaner exhaust emissions than a 4-stroke, it produces 5 to 10 times less Carbon Monoxide (CO) while idling or trolling.
Can I use regular gear oil in my lower unit?
So, can you use any old gear lube in your marine lower unit? If you want the best protection possible, and want your lower unit to last as long as your boat, then the answer is no. Consult your engine’s manual and look for the proper marine gear lube for your application.
What is TC W3 2 stroke?
Havoline 2-Cycle Engine Oil TC-W3 is a high quality two stroke engine lubricant that delivers excellent performance in water-cooled and air-cooled applications. It is formulated to provide excellent lubrication and deposit control in a wide range of applications.
What kind of oil does my outboard take?
25W40 is recommended for all marine engines. Things to know about this oil: For use in all four-stroke marine engines. This oil is engineering approved for all marine four-stroke applications including outboard, MerCruiser, high performance, sterndrive/inboard.
Who makes Evinrude 2 stroke oil?
Johnson-Evinrude XD30 2-Cycle Conventional Oil.
Can I use regular gear oil in my lower unit?
So, can you use any old gear lube in your marine lower unit? If you want the best protection possible, and want your lower unit to last as long as your boat, then the answer is no. Consult your engine’s manual and look for the proper marine gear lube for your application.
What is TC-W3 2 stroke?
Havoline 2-Cycle Engine Oil TC-W3 is a high quality two stroke engine lubricant that delivers excellent performance in water-cooled and air-cooled applications. It is formulated to provide excellent lubrication and deposit control in a wide range of applications.
What oil goes in an outboard lower unit?
You can use any brand of lubricant that has a grade designation of API GL5 SAE 80 or 90 weight. Make sure you do not mix different oil brands or weights. into the BOTTOM drain hole. Then slowly squeeze the bottle to force the oil into the lower unit.
Substitute For Evinrude XD100 – Moderated Discussion Areas – ContinuousWave
As far as I know, and I believe I am fully informed on this question, there is no authorized substitute for Evinrude XD100 oil. If you have your Evinrude E-TEC motor programmed for an oiling rate that requires that you use XD100 oil, you have to use XD100 oil.
Opinions on Evinrude E-Tec – In-Depth Outdoors
I had owned several Yamahas before my current Evinrude Etec 200 HO. I never thought I’d ever say this, but I like my Evinrude more than any Yamaha I’ve owned (carb, efi, HPDI, 4-stroke).
What Type of Oil Should You Use for Your Outboard? – Evinrude
The right engine oil can make all the difference, and your outboard’s oil is no different. Learn more here and make the right choice for your engine!
Evinrude Johnson 764357 E-TEC XD 100 Synthetic Formula 2-Cycle Oil, 1 …
Make sure this fits by entering your model number.; Maximum detergency reduces combustion deposits smokeless, ash less and odorless ; Introducing Evinrude/Johnson XD100 oil – a premium synthetic formulation that delivers ultimate performance in direct injection and oil injection outboards
6 Gallon Case Evinrude XD100 Oil 764357-6, 779711-6
Evinrude XD100 Oil is a synthetic formula for use in Evinrude E-TEC outboard engines, direct injection, or oil injected outboard engines. XD100 provides unsurpassed protection against friction and wear while maximum detergency helps eliminate combustion deposits.
1 Gallon Evinrude XD100 Oil
Please note, due to size, your order may be shipped via truck freight rather than UPS. The quoted freight quote is for delivery to a commercial address with a forklift and/or a loading dock to unload the item from a truck. Residential and Lift Gate delivery fees are assessed by the carrier and will be collected before processing your shipment.
What does Evinrude XD100 oil smell like?
I don`t know what additives are in the Evinrude XD100 oil. The oil smells like ammonia. very thin in viscosity. I had an Etec 115 it`s a great motor. I don`t think Id use anything but what BRP recomends. It`s a dealer only item where I live. That was a pain. I kept my engine at the factory 50:1 setting and paid the price for XD100. New the motor drank oil after the first 20 hours it was good. Since I sold the boat I bought a smaller used boat with a 50 Mercury four stroke. have yet to try it out. The Evinrude Etec was a great experience for me. I`d buy another Etec again. Too bad the XD100 isn`t on more shelves.
What does XD100 mean?
My understanding is that XD100 means 100% synthetic. XD50 is a synthetic blend. The Evinrude/Johnson TCW3 oil is conventional base. The XD100 seeting on the ETEC engine does not mean the engine is running a 100:1 ratio, but rather the engine is set to consume the XD100 oil.
What oil do you use on a snowmobile?
Just use a quality full synthetic injection oil. That’s what we run in Etec snowmobiles same technology.
What does oil smell like?
The oil smells like ammonia. very thin in viscosity.
Does oil vary in injected engines?
Yep. Like all injected engines the amount of oil can vary significantly.
What is XD50 oil?
XD50 is suitable for any direct injection, oil injection or pre-mixed outboard that specifies a TC-W3 oil.
What is the purpose of the XD100?
Use XD100 to ensure long engine life, durability and reliability in Evinrude E-TEC G2 and Evinrude E-TEC outboards. XD100 maintains engine power and acceleration by reducing combustion deposits and friction. Designed specifically for Evinrude outboards, the synthetic formula delivers maximum engine performance with uncompromising lubrication.
Bel-Ray
Bel-Ray Marine Biodegradable 2-Stroke Engine Oil- HP Marine
Bel-Ray Marine HP Synthetic Blend 2T 2-Stroke Engine Oil- AIO Injector or HP Marine
Canadian Tire
MotoMaster Formula 1 2-Cycle Outboard Engine Oil- AIO Injector or HP Marine
Carquest
Carquest Premium 50:1 2-Cycle Outboard Oil- Saber Outboard or AIO Injector
Carquest Multi-Purpose 50:1 2-Cycle Outboard Oil- Saber Outboard or AIO Injector
CITGO
CITGO Supergard Marine Plus Two-Cycle Engine Oil- AIO Injector or HP Marine
CITGO Supergard Sea and Snow Two-Cycle Engine Oil- AIO Injector
Evinrude
Evinrude E-TEC XD 100 Synthetic 2-Cycle Oil- HP Marine
Evinrude XD 30 Synthetic 2-Cycle Oil- AIO Injector or HP Marine
Evinrude XD 50 Synthetic-Blend 2-Cycle Oil- AIO Injector or HP Marine
Honda
Honda Marine 10W-30 4-Stroke Motor Oil- AMSOIL 10W-30 4-Stroke Marine Synthetic Motor Oil
Honda Marine 5W-30 4-Stroke Motor Oil- AMSOIL 10W-30 4-Stroke Marine Synthetic Motor Oil
Itasca
Itasca Marine 2-Cycle Outboard TC-W3 Engine Oil- AIO Injector or HP Marine
What is factory standard oil?
The factory standard oil setting is for the use of any TC-W3 rated oils, and it will use more oil since there is less lubricity and anti-wear additives in standard oils.
Can you use E-Tec oil on XD100?
BTW, if your motor is an E-Tec there is no substitute oil for XD100 that anyone will guarantee won’t fry your powerhead and there’s no practical reason to consider a change. And if it’s XD100 you’re using, you’re getting hosed at $42 a gallon. Try here:
Does XD100 oil have 100:1?
No! XD100 doesn’t stand for 100:1 at all. The oiling varies considerably by RPM. If all you did was troll, you would get greater than 100:1. The reality is, for most people, E-Tecs get between 85:1 and 90:1.
Does Evinrude E-TEC have a reduced oil setting?
The Evinrude E-TEC does have an optional “reduced oil setting” that is programmed into the computer by the dealer, at the customer’s request. It requires the use of Evinrude’s XD-100 oil only, not substitutes.
What is the difference between XD 100 and XD 50?
XD 100 is a 100:1 ratio vs. XD 50 50:1 ratio. The XD 100 is not even close to twice the price of the XD 50, therefore it makes no sense to change. Also, they are correct about there being no substitute for the XD 100. The synthetic marine 2 stroke oil Amsoil makes is only for 50:1 ratios. I dont know where you buy your bulk oil, but shop around. Acies is about $32-34/gal of XD 100 last I heard. I buy mine in bulk at POC Marine. I paid $32.50 last time I loaded up. If you buy a bunch at a time, you might try to deal with them on it, even though it’s probably a long shot.
What is XD 50?
Xd-50 is a synthetic blend of lubricating oil. The numbers have nothing to do with the mixing ratios, sorry. Click to expand… You are correct about the full synthetic and synthetic blend. The motor can burn both XD 50 and XD 100 when set at a 50:1 ratio.
What is the only marine oil out there without a generic equivalent?
I believe he was telling the truth. He stated that the only marine oil out there without a generic equivalent avilable is the xd-100. It sounds like you may be stuck, unless a mechanic can re-set the computer for the xd-50 and guarantee you that it will still protect the engine since it will then inject more oil.
What does EMM mean in oil?
The engine computer (EMM) determines the amount of oil delivered by taking into account the rpm, throttle opening, temps, exhaust back pressure, and how quickly the throttle is opening. There is no standard oil ratio, just an optional choice (most models) between the factory TC-W3 oil setting or the optional reduced-usage XD-100 setting.
Can you reprogram an XD-50?
They can reprogram the motor so it will handle XD-50. that is what I did to mine. Its a little cheaper. I would stay with the evinrude brand though.
Can you program a 250ho to a XD100?
I was told by E-tec technician that he noticed on the new 250ho that you can’t even program it to xd100. It is locked on xd50 program but recommend to use the 100 in it. That is to allow the motor to get alittle more oil for better lubrication and “life” of the motor. I don’t see it being a problem running the xd50 but have your dealer re-program it for xd50 so it gets the right amount of oil. I would program it to xd50 and run the boat and calculate how much oil you are using on xd50 and calculate it on running xd100 to see what would cost less in the long run. If it comes down to couple dollars I would run the xd100 for the simple fact it is a higher quality oil.
Can you burn XD 50 and XD 100?
You are correct about the full synthetic and synthetic blend. The motor can burn both XD 50 and XD 100 when set at a 50:1 ratio. However, the motor can be reprogrammed to 100:1 ratio and then can only burn XD 100. Hence the XD 100. This is firsthand info considering this is how I run my engine. The numbers on the XD 30 & XD 25 have nothing to do with the burn ratios.
What is Evinrude E-TEC oil?
Evinrude® E-TEC™ marine engines are unique in that they offer an alternative, lean-mix setting that allows the engine to use less oil. Whether programmed to operate at the standard mix ratio or reprogrammed to the lean-mix setting, E-TEC engines use sophisticated electronic equipment to monitor conditions, including rpm and throttle position, to determine the appropriate gas-to-oil mixture. To use the lean-mix setting, however, customers must have their engines reprogrammed by an Evinrude dealer and agree to use Evinrude XD100™ oil exclusively, often at a higher cost compared to other oils. Bombardier Recreational Products (BRP®), the manufacturer of Evinrude E-TEC engines, has not established a performance specification against which to qualify other oils.
What percentage of oil is perfect in cylinder bore scuffing?
In the area of cylinder bore scuffing, both oils limited metal-to-metal contact and achieved perfect scores of0.00 percent. The cross-hatch pattern remains visible on the cylinder walls of both engines.
Can you use XD100 oil on Evinrude?
To use the lean-mix setting, however, customers must have their engines reprogrammed by an Evinrude dealer and agree to use Evinrude XD100™ oil exclusively, often at a higher cost compared to other oils. Bombardier Recreational Products (BRP®), the manufacturer of Evinrude E-TEC engines, has not established a performance specification …
Does undercrown oil cause preignition?
While undercrown deposits do not impede performance, heavy piston crown deposits can cause preignition and consequent poor performance. Two-cycle oils must resist heavy deposit formation on the piston crown caused by the high temperatures inside the combustion chamber. HP Marine demonstrated strong performance in the area of piston crown deposits.