Dexron hp equivalent


image

Delivers extended transmission life

Mobil 1™ Synthetic LV ATF HP is an advanced full synthetic automatic transmission fluid formulated from synthetic base oils and an advanced additive system. It is approved and licensed by General Motors against DEXRON® HP ATF.

What is the best synthetic transmission fluid?

pail

  • Mobil Delvac Synthetic Transmission Fluid 50 is a fully synthetic, manual transmission lubricant.
  • Engineered to meet the most demanding extended drain and OEM warranty requirements.
  • Mobil Delvac Synthetic Transmission Fluid 50 is recommended for year-round lubrication of manual transmissions in light to severe duty on- and off-highway equipment.

More items…

When to change transmission fluid?

  • If a grinding sound is heard from underneath the vehicle while the engine is running, but the car is not moving.
  • If you have problems shifting gears.
  • If the vehicle slips out of gear, or if the vehicle doesn’t move when the gas pedal is pushed.

Does Valvoline change transmission fluid?

Transmission Flushes & Fluid Replacements Help keep your gears shifting smoothly – with transmission fluid replacement services from Valvoline Instant Oil Change SM. Our certified technicians can perform this service in about 20 minutes – while you wait in the convenience of your car. Plus, you could save between 30% to 50% versus the dealership 1.

Where to buy transmission fluid?

Shop for Transmission Fluids in Transmission, Brake and Steering Fluids. Buy products such as Valvoline Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid 1 GA at Walmart and save.

image


Can I use DEXRON VI instead of HP?

Yes, it is backward compatible and works great where dex6 is required.


Who makes DEXRON HP?

Dexron LV ATF HP is made by Mobil and is marketed as Mobil 1 LV ATF HP.


What is equivalent to DEXRON ATF?

The most common names are Dexron, Mercon, and ATF+4, which are brand names of General Motors, Ford, and Chrysler fluids, respectively.


What is DEXRON H?

ACDelco DEXRON® III (H) is a premium quality automatic transmission fluid intended for use as service-fill for automatic transmissions and vehicle components that use automatic transmission fluid as a lubricant or hydraulic fluid, such as transfer cases, manual transmissions and power steering systems.


What does ATF HP stand for?

automatic transmission fluidMobil 1™ Synthetic LV ATF HP is an advanced full synthetic automatic transmission fluid formulated from synthetic base oils and an advanced additive system. It is approved and licensed by General Motors against DEXRON® HP ATF.


What is HP transmission fluid?

HP AUTO TRANSMISSION FLUID A is a high quality automatic transmission fluid manufactured from highly refined base stocks and carefully selected additives, to provide a superior performance in the automatic transmission systems of automotive.


Are all DEXRON fluids compatible?

Yes, DEXRON-VI fluid can be used on any vehicle type that calls for DEXRON transmission fluid.


Can I use Dex Merc instead of DEXRON?

Member. GM no longer licenses Dexron III. Dex/Merc would be fine. Dexron VI is listed by GM as backward compatible, but is thinner than original Dexron III.


Is DEXRON III the same as DEXRON VI?

DEXRON-VI can be used in any proportion in past model vehicles equipped with an automatic transmission, in place of DEXRON-III (for instance, topping off the fluid in the event of a repair or fluid change). DEXRON-VI is also compatible with any former version of DEXRON for use in automatic transmissions.


What is the difference between dexron III and dexron III H?

Dexron III licence H was introduced in June 2003 to replace the Dexron III G fluid. It has an oxidatively stable base oil (group 2 or group 3). Oils according to this specification have longer maintenance of friction properties and anti-shrudder properties, better foam control and a longer fluid life.


What is dexron Iiig?

Dexron III G is a universal ATF (Automatic Transmission Fluid) of the latest generation for all automatic transmissions with and without controlled torque converter lock-up clutch (socalled GKÜB = transmission-clutch lock-up) for which transmission fluids of type Dexron III G are prescribed.


What replaces dexron III?

Dexron VIDexron VI replaced Dexron II and III, and can be used in General Motors domestically built or import transmissions that specified Dexron II or Dexron III. Dexron VI is a low viscosity transmission fluid and should also be used with the full synthetic low viscosity transmission fluid.


Who makes DEXRON VI?

Mobil DEXRON-VI ATF is a high performance, synthetic blend formulation that meets or exceeds the stringent requirements of GM’s DEXRON-VI specification and provides warranty protection for 2006 and newer GM vehicles. It also provides improved performance in older GM vehicles, wherever DEXRON is specified.


Is Dex Merc the same as DEXRON VI?

Dex/Merc would be fine. Dexron VI is listed by GM as backward compatible, but is thinner than original Dexron III. I’d use the Dex/Merc myself.


What is DEXRON Iiig?

Dexron III G is a universal ATF (Automatic Transmission Fluid) of the latest generation for all automatic transmissions with and without controlled torque converter lock-up clutch (socalled GKÜB = transmission-clutch lock-up) for which transmission fluids of type Dexron III G are prescribed.


Is DEXRON III the same as DEXRON VI?

DEXRON-VI can be used in any proportion in past model vehicles equipped with an automatic transmission, in place of DEXRON-III (for instance, topping off the fluid in the event of a repair or fluid change). DEXRON-VI is also compatible with any former version of DEXRON for use in automatic transmissions.


Why is the Dexron II/III fluid so big?

The big jump in fluids from the Dexron II/III has been due to seals and the electronics, precious metals used, within the trans now as opposed to mechanical valves.


What ATF is used in Hydra-Matic 6L80?

The Hydra-Matic 6L80 requires the use of DEXRON®-VI ATF. DEXRON®-VI significantly improves fluid viscosity, shift performance and fluid durability. GM tests have demonstrated that DEXRON®-VI delivers more than twice the durability and stability in friction tests compared to existing fluids. DEXRON®-VI has also demonstrated superior performance in pitting, foaming, oxidation and shear stability tests.


Is HP fluid harmful?

As the designated fluid for the 8L90, it’s understandable why GM has gone to “no dipstick” servicing of transmissions, so that the potential for using an incorrect fluid (ie. harmful) cannot be used without great effort or intent.


Is Dex6 backward compatible?

Yes, it is backward compatible and works great where dex6 is required. It stopped my car from jerking into gear after driving with it for 200 miles. It’s way better for high temps too. I attached a pic showing that it’s also for use where dex6 is required!


Is the Dexron HP transmission specific?

I was just pointing out that THEIR choice of words actually introduces the confusion, as it is clearly a transmission-specific issue, although the GenV engine family is the exclusive home of the 8L90, so the press release can’t be said to be “wrong”.


What is a 2013 Dexron HP?

As shown on the photograph of the rear panel, the 2013 Dexron HP is composed of a group 4 Polyalphaolefin (PAO) Base oil and additives provided by the Afton Chemical Corporation. The rear panel label of early containers of this fluid incorrectly state that this fluid is backward compatible with previous Dexron ATF, it is not. The label was corrected on later bottles of the fluid.


What is Dexron II?

Dexron-II (C) was composed of a more stable, less reactive, hydrocracked Group 2 base oil plus a revised additive package with corrosion and rust inhibitors such as Jojoba oil; however, the additive package caused problems with corrosion-prone solder in a relatively small number of GM’s transmission fluid coolers.


What is a Dexron III license number?

DEXRON-VI (J). GM Dexron-III (F) licensed products have a license number on the can that begins with the letter F. Example: F-30001. This fluid is backward compatible with all previous Dexron fluids as well as the Type “A” Suffix “A”, and the Type “A” fluids produced from 1949 to 1966.


What is the license number for Dexron II?

GM Dexron-II (E) licensed products have a license number on the container that begins with the letter E. Example: E20001. This fluid is backward compatible with all previous Dexron fluids as well as the Type “A” Suffix “A”, and the Type “A” fluids produced from 1949 to 1966.


What is GM6417M?

Released in December 1998, GM’s Dexron-III (G) specification (GM6417M) was a synthetic blend automatic transmission fluid, especially developed to address the VCCC shuddering issue. It is also suitable for power steering systems, some hydraulic systems and for rotary air compressors where an excellent low-temperature fluidity is required.


Who makes Dexron LV ATF?

Dexron LV ATF LV is made by Mobil and is marketed as Mobil-1 LV ATF HP. Mobil-1 LV ATF HP is composed of a Gas to liquids (GTL) Group 3+ Base oil and additives developed by Infineum needed for the proper operation of the 2015 and above GM 8L90 and 8L45 8-Speed rear wheel drive automatic transmission.


Is Dexron a trademark?

The name is a registered trademark (later becoming a brand) of GM, which licenses the name and specifications to companies which manufacture the fluid and sell it under their own brand names. Not all Dexron fluids are licensed for reselling under another brand name.


About The Dexron HP ATF Specification

The “high-performance” Dexron HP automatic transmission fluid specification for is for Chevrolet, GMC and Cadillac applications equipped with the Hydra-Matic 8L90 eight-speed automatic transmission.


About The GM 8L90 8-Speed Transmission

As the industry is trending rapidly toward 8-speed (and larger) transmissions, GM designed and built the 8-speed Hydra-Matic 8L90 automatic transmission for the 2015 model year. The two main attributes of this transmission are improved fuel economy and increased torque tolerance.


Why is Dexron 3 so cheap?

Dexron III is one of the best hydraulic fluids money can buy… the reason it is so cheap is that it’s made in such high bulk.


What to do if your car calls for Dexron III?

If your vehicle calls for Dexron III, use it. If it calls for ATF-HP, use that.


Is HP the same as Dexron?

HP is a different grade of automatic transmission fluid than Dexron III, but both are conventional. Use of conventional or synthetic is up to the owner but Subaru always uses conventional. HP has different frictional properties than Dexron III.


Is DexIII the correct fluid for power steering?

No problem. Yep, DexIII is the correct fluid for your car. No reason to buy the expensive juice if good ‘ol tried and true will do. It’s convenient to keep around anyway, because the power steering uses the same fluid.


Is Idemitsu ATF-HP the same as Castrol Transmax-J?

Castrol Transmax-J is only sold in Asia and Australia and Pennzoil ATF-J is not on the market at all (per Pennzoil). Castrol’s Multivehicle ATF and Valvoline Max-Life ATF supposedly meet the requirements of Nissan Matic-J, which is the same as ATF-HP from my research, but neither are recognized by Nissan or Subaru as a suitable replacement. Also, the Castrol Multi is only sold to shops in bulk, not consumers.


Features and Benefits

Mobil 1 Synthetic LV ATF HP is a high performance synthetic formulation that delivers extended transmission life with its improved oxidation and thermal stability. Mobil 1 Synthetic LV ATF HP has frictional properties that provide smooth gear shifting during all operating conditions.


Health and safety

Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx

image


Leave a Reply

Your email address will not be published. Required fields are marked *