Cat tdto 30 equivalent

Cat Transmission/Drive Train Oil (TMS) is recommended as an option to replace Cat TDTO SAE 30 and 10W in Caterpillar transmissions, wet brakes, and hydraulic compartments where a multiviscosity product would offer improved performance over a wider temperature range.

What is cat TDTO oil?

Cat TDTO utilizes an additive technology developed exclusively for Caterpillar that provides optimum balance between clutch friction characteristics and gear wear requirements. This unique additive significantly improves transmission gear wear performance over TO-2 oils.

What kind of transmission fluid does a Caterpillar use?

TO-4 Fluid Transmission and Drive Train (Heavy Duty Off-Highway) TO-4 Fluids are specifically formulated SAE 10, SAE 30 and 50 oils designed to meet Caterpillar’s latest Transmission and Drive Train Lubricant specification. TO-4 supersedes and replaces Caterpillar TO-2 requirements.

WHAT IS A to-4 oil?

Performance Plus Heavy Duty TO-4 Fluids are premium quality transmission, final drive and hydraulic oils designed to deliver higher frictional characteristics as they are formulated to meet the specific frictional characteristics of Caterpillar and Allison Powershift Transmissions.

What hydraulic fluid is compatible with Caterpillar?

Developed, tested and approved by Caterpillar, Cat Hydraulic Oil (HYDO) ensures optimum life and performance when used as recommended in Cat® hydraulic and hydrostatic systems. The preferred lubricant for Cat hydraulic systems is Caterpillar Hydraulic Oil (HYDO).

What viscosity is Cat hydraulic oil?

Suitable For Use In Caterpillar Excavator: Hydraulic 10w – 15w/40 Engine Oil – EP80w/90 Gear Transmission.

What kind of oil goes in a final drive?

Gear oil is a special type of highly viscous lubricant that is well adapted for use in differentials and transmissions, including final drives. Gear oil, also referred to as gear lube, is the lubricant for the planetary side of a final drive.

What is dexron III?

ACDelco DEXRON® III (H) is a premium quality automatic transmission fluid intended for use as service-fill for automatic transmissions and vehicle components that use automatic transmission fluid as a lubricant or hydraulic fluid, such as transfer cases, manual transmissions and power steering systems.

What weight is ISO 68 hydraulic oil?

SAE 20 weightThis is the thickness of the fluid tested at 40 degrees Celsius. ISO VG 68 is on the heavier side for a hydraulic fluid which flows equivalent to a SAE 20 weight lubricant.

What hydraulic oil does a cat 908M use?

Cat DEO ULS 10W-30 Is Recommended For Your CATERPILLAR 908M (S/N Z8800001 – Up)

What kind of oil does an Allison transmission take?

Allison recommends TES 668® Approved Fluids to extend drain intervals and enhance transmission performance and durability in all operating environments. Allison TES 668® Approved Fluids are recommended for use in Allison 1000 Series™, 2000 Series™, 3000 Series™, 4000 Series™ and H 40/50 EP™ on-highway products.

What is ISO 32 hydraulic fluid?

Hydraulic 32 is part of Crown Oil’s range of premium-grade mineral-based hydraulic oils with good anti-wear properties providing protection in the most demanding of systems while still meeting ISO standards for hydraulic oil. This hydraulic fluid is rust, corrosion and oxidation inhibited.

What color is cat hydraulic fluid?

Applications And Mixing Directions For CAT Oil Dye Caterpillar Oil Dyes are available in the colors blue or red. They are soluble with most industrial hydraulic, compressor or gear oils where increased visibility is desired.