What is ASTM A193 grade B7 alloy steel?
ASTM A193 Grade B7 Raw Material AISI-SAE 4140 Alloy Steel is starting raw material used for manufacturing ASTM A193 Grade B7 Bolts and other threaded fasteners. AISI-SAE 4140 is subsequently hardened / quenched using liquid medium followed by tempering to achieve mechanical properties as required in ASTM A193 Grade B7 specification.
What is the difference between A193 grade B16 and grade B5?
Unlike the stainless steel grades within the A193 specification, Grade B16 has no corrosion-resistant properties unless they are coated. Grade B5 ASTM A193 Grade B5 bolts and threaded studs are manufactured from AISI 501 stainless steel which has been quenched and tempered to increase strength.
What is a grade B7 bolt?
Grade B7. ASTM A193 Grade B7 bolts and threaded studs are manufactured from a chromium-molybdenum steel and are quenched and tempered (heat treated) to develop the desired mechanical properties (strength).
What is the difference between A193 grade B8M Class 1 fasteners?
ASTM A193 Grade B8M Class 1 fasteners are similar to Grade B8 but instead are manufactured from AISI 316 stainless steel as opposed to AISI 304 stainless steel. Type 316 stainless offers superior corrosion resistance to type 304 stainless due to the added molybdenum.
What is the difference between A193 and B16?
What is A193 grade B8?
What is a B7 bolt?
What is the difference between 316 stainless steel and 304 stainless steel?
See 1 more
About this website
What grade is B7 equivalent to?
Grade 5ASTM A193 B7 is a chrome-moly steel with strength similar to Grade 5 properties and is commonly used in high temperature and pressure applications.
What material is ASTM A193 B7?
chromium-molybdenum low-alloy steelASTM A193 defines both SI (Metric) and inch-pound units. Grade B7 is a heat-treated chromium-molybdenum low-alloy steel with minimum tensile strength requirement of 125 ksi (860 Mpa), yield 105 ksi (720 Mpa), and maximum hardness of 35HRC.
Is ASTM A193 Grade B7 carbon steel?
ASTM A193 Grade B7M studs are identical in chemistry to Grade B7, as they are quenched and tempered carbon steel to achieve a lower hardness.
Is ASTM A193 Grade B7 stainless steel?
The ASTM standard covers alloy steel and stainless steel bolting materials for high temperature or high-pressure service….A193 Grades.B7Alloy steel, AISI 4140/4142 quenched and temperedB8Class 2 Stainless steel, AISI 304, carbide solution treated, strain hardened3 more rows•Nov 17, 2020
Is B7 the same as Grade 8?
It is also quenched and tempered at 800 F leading to its strength. Grade 8 has 0.28-0.55% carbon, 0.030% max phosphorus, and 0.050% max sulfur….Grade 8.GRADEASTM A193 B7 (Chromium Molybdenum)GRADE 8 (Heat Treated After Threading)ROCKWELL HARDNESSC26-C32C33-C392 more rows•Jun 17, 2020
Is B7 the same as 4140?
Alloy Steel Quenched & Tempered Threaded Rods (AISI 4140/4142) The ASTM A193-B7 (Grade B7), is the specification for a heat-treated chrome-moly steel used for medium high temperature service. Rods that meet this specification are either made from AISI 4140 or 4142.
Is Grade 5 the same as B7?
B7. This chromium molybdenum steel has similar strength to SAE grade 5 fasteners, however, it is specifically used in high temperature and pressure applications. This grade is for fittings, flanges, valves, and pressure vessels. It is also used as threaded rod in concrete and epoxy.
Is B7 the same as A325?
In short, no, the thread length of A193 B7 bolts is not the same as the thread length of A325 bolts. The F3125 Grade A325 specification covers heavy hex structural bolts which have standard fixed thread lengths shown in the table below.
What is difference between A193 B7 and b7m?
The minimum tensile strength for A193B7 is 125 ksi for diameters under 2-1/2”, and 115 ksi for 2-1/2” – 4” diameter. Hardness is probably the most significant difference between A193B7M & A193B7. The maximum hardness of ASTM A193B7M is 235 HB or 99 HRB, while the maximum hardness of A193B7 is 321 HB or 35 HRC.
What is the difference between A193 and SA193?
What is the difference between A193 Grade B7 and SA193 Grade B7? A193 is an ASTM (American Society for Testing and Materials) specification, whereas SA193 is from ASME (American Society of Mechanical Engineers). ASME repurposed the ASTM specification and added an “S”. The primary difference is the application.
What is A194 Grade 2H?
ASTM A194 Grade 2H is a standard material specification for high tensile nuts and other internally threaded fasteners, made from carbon steel. Grade 2H nuts can be produced by means of hot forging, cold forging or machining from heat treated bar stock.
What is the difference between B7 and B16 bolts?
Vanadium is the main composition difference that separates B16 from B7, allowing the higher temperature limits. Typically ASTM A194 Grade 4 Heavy Hex Nuts are specified with B16 studs & bolts, although Grade 7 is also fairly common.
What is difference between A193 B7 and b7m?
The minimum tensile strength for A193B7 is 125 ksi for diameters under 2-1/2”, and 115 ksi for 2-1/2” – 4” diameter. Hardness is probably the most significant difference between A193B7M & A193B7. The maximum hardness of ASTM A193B7M is 235 HB or 99 HRB, while the maximum hardness of A193B7 is 321 HB or 35 HRC.
What is the difference between A193 and SA193?
What is the difference between A193 Grade B7 and SA193 Grade B7? A193 is an ASTM (American Society for Testing and Materials) specification, whereas SA193 is from ASME (American Society of Mechanical Engineers). ASME repurposed the ASTM specification and added an “S”. The primary difference is the application.
Is B7 high tensile?
ASTM A193 Grade B7 is a standard material specification for chromium-molybdenum alloy steel fasteners for use in high tensile, high temperature and special purpose applications.
What is the difference between B7 and B16 bolts?
Vanadium is the main composition difference that separates B16 from B7, allowing the higher temperature limits. Typically ASTM A194 Grade 4 Heavy Hex Nuts are specified with B16 studs & bolts, although Grade 7 is also fairly common.
ASTM A193 Grade B8 Specification – Boltport Fasteners
ASTM A193 Grade B8 Specification for high tensile bolts, screws, stud bolts, anchor bolts, threaded rods, round bars and other externally threaded fasteners, made from 304 stainless steel. ASTM A193 specification covers requirements for chemical composition, mechanical properties, heat-treatment, hardness, recommended nuts-washers and markings for Grade B8 fasteners.
ASTM A193 Grade B8M Specification – Boltport Fasteners
ASTM A193 Grade B8M specification covers requirements for 316/316L stainless steel bolting material with high tensile properties, for use in high temperature or high-pressure service and other special purpose applications.
ASTM A194 Grade 8M Specification – Boltport Fasteners
Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or both. ASTM A194 specification covers a variety of carbon, alloy, and martensitic stainless steel nuts in the size range 1/4 through 4 in. and metric M6 through M100 nominal.
What is the difference between A193 and B16?
Although A193 Grade B16 bolts and studs have similar strength requirements as Grade B7, the vanadium and higher tempering temperature helps the fasteners retain their molecular structure and strength under higher ambient temperatures than Grade B7.
What is A193 grade B8?
ASTM A193 Grade B8 Class 1 bolts and threaded studs are manufactured from AISI 304 stainless steel. Type 304 is the most common grade of stainless steel used in the fastener industry. Fasteners manufactured using this austenitic stainless steel require carbide solution treatment on bars to be threaded or after the heading operation for bolts with forged heads. Carbide solution treatment, also referred to as solution annealing, is a process in which fasteners or stainless bars are heated and then water-quenched to assure maximum corrosion resistance. A193 Grade B8 Class 2 bolts are strain hardened after carbide solution treatment to achieve increased strength characteristics and reduce the potential for galling. Class 2 bolts are marked “ B8SH ” with the grade symbol underlined.
What is a B7 bolt?
Grade B7 is the most common grade of A193 bolts used in construction. B7 threaded studs and short, headed bolts are readily available in the marketplace. Grade B7 bolts are commonly used in pipe flange connections.
What is the difference between 316 stainless steel and 304 stainless steel?
Type 316 stainless offers superior corrosion resistance to type 304 stainless due to the added molybdenum. Grade B8M Class 1 fasteners require carbide solution treatment, while Class 2 fasteners require an additional strain hardening operation which increases the strength and reduces the susceptibility to galling.
Countries We Export to
Ubique Alloys Pvt. Ltd.
Cities We Deliver to
Ubique Alloys Pvt. Ltd.
What is the temperature of a B7 bolt?
as I know, A193 B7 bolt is low alloy steel fit to high temprature service up to around 400 C, while all bolts manufactured to iso 898 (such like 10.9) is normally applicable to be used only under 150 C.
What is an A574 socket?
A574, however, is a socket head cap screw standard, so studs and hex bolts are left out and do not have a direct equivalent. Portland Bolt is happy to help if you have specific questions or needs.
Can Portland bolts be made in metric?
Portland Bolt is happy to help if you have specific questions or needs. We cannot manufacture metric sizes or bolts to metric grades, and we are not able to make recommendations, but we can work with you to determine what is feasible and cost effective if a substitution is allowed.
Should an engineer be consulted before grade substitutions are made?
As always, an engineer should be consulted before grade substitutions are made.
Is 8.8 bolt the same as A325?
In order to substitute, you’d need approval from the project engineer. 8.8 bolts should have similar chemistry as A325 bolts (although not identical), but both will be quite different than an A307 bolt. None of the three will have any inherent corrosion resistance unless you choose to coat them.
What is the difference between A193 and B16?
Although A193 Grade B16 bolts and studs have similar strength requirements as Grade B7, the vanadium and higher tempering temperature helps the fasteners retain their molecular structure and strength under higher ambient temperatures than Grade B7.
What is A193 grade B8?
ASTM A193 Grade B8 Class 1 bolts and threaded studs are manufactured from AISI 304 stainless steel. Type 304 is the most common grade of stainless steel used in the fastener industry. Fasteners manufactured using this austenitic stainless steel require carbide solution treatment on bars to be threaded or after the heading operation for bolts with forged heads. Carbide solution treatment, also referred to as solution annealing, is a process in which fasteners or stainless bars are heated and then water-quenched to assure maximum corrosion resistance. A193 Grade B8 Class 2 bolts are strain hardened after carbide solution treatment to achieve increased strength characteristics and reduce the potential for galling. Class 2 bolts are marked “ B8SH ” with the grade symbol underlined.
What is a B7 bolt?
Grade B7 is the most common grade of A193 bolts used in construction. B7 threaded studs and short, headed bolts are readily available in the marketplace. Grade B7 bolts are commonly used in pipe flange connections.
What is the difference between 316 stainless steel and 304 stainless steel?
Type 316 stainless offers superior corrosion resistance to type 304 stainless due to the added molybdenum. Grade B8M Class 1 fasteners require carbide solution treatment, while Class 2 fasteners require an additional strain hardening operation which increases the strength and reduces the susceptibility to galling.
