68089195aa equivalent


Well, the Mopar 68089195AA BW44-45 and pre-2016 transfer case fluid is essentially Dexron III ATF with an Allison approval, but you can use and Dexron III ATF to replace it. The one in the Mopar bottle is Shell Spirax S2 ATF A389. The Mopar 68049954AC BW44-40 and +2016 BW44-44 transfer case fluid is Mobil Fluid LT.


What is bw44 44 oil?

RAVENOL Transfer Fluid BW 44 is a PAO (Poly-alpha-olefin) based, fully synthetic transfer fluid with a special additive and inhibition, which ensure the proper functioning of the active transfer case.

What fluid goes in transfer case?

automatic transmission fluid (ATF)Transfer cases may be filled with gear oil, automatic transmission fluid (ATF), or specialty lubricants.

What fluid goes in a Ram 2500 transfer case?

Differential gear oil and transfer case fluid specification capacity notes: The 2019-2022 Ram 2500 recommends the use of SAE 75W85 API GL-5 gear oil in both front and rear differentials.

Does Valvoline do transfer case fluid?

Our Valvoline Differential and Transfer Case Services are thermally stable and help remove deposits – while working to keep new ones from forming. This helps ensure proper gear lubrication.

What happens if you overfill transfer case?

Registered. OK – there’s NO pressure in the transfer case ….. so overfilling it (not to the top, obviously!) would not really put any more responsibility on the seals by making them leak.

What happens if transfer case has no fluid?

Difficulty changing gears – Low or dirty transfer case fluid can affect your transmission’s ability to shift gears. It can also result in your car unexpectedly falling out of four-wheel drive. Loud noises while driving – As the transfer case fluid loses its lubricating properties, friction will occur inside.

What oil goes in a Dodge transfer case?

We recommend you use MOPAR BW44–44 Transfer Case Fluid. We recommend you use MOPAR GL-5 Synthetic Axle Lubricant SAE 75W-85.

How much fluid does a Dodge 2500 transfer case hold?

What Fluid Does My Dodge or Ram Transfer Case Take?Year RangeModelCapacity1988-2000Dakota, (Durango 98-00)2.5 Pints1994-2000Ram 15002.5 Pints1994-2000Ram 25005.0 Pints1994-2000Ram 2500, Ram 35006.5 Pts.***30 more rows

How much oil goes in a 6.7 Cummins?

A 6.7 Cummins engine takes 12 quarts of oil with a filter change. The oil capacity without a filter change is 10.5 quarts. This is for a 2010 and newer model year Dodge Ram 2500/3500 truck equipped with a 6.7L Cummins diesel engine.

What kind of oil do I put in rear differential?

There are two types of differential fluid. One is mineral oil, which is a natural, crude oil-based fluid. The other is synthetic differential fluid, which is created in a lab. As with all synthetic oils, synthetic differential fluid oils can be fine-tuned for optimal performance.

How often should you change your rear differential fluid?

How Often Should the Rear Differential Fluid Be Changed? The recommendation of most car manufacturers is that you change your rear differential fluid about every 30,000 miles to 60,000 miles. Look at the owner’s manual of your car to find the exact mileage amount.

What is NV245 transfer case fluid?

Mopar NV245-NV247-NV249 Transfer Case Oil ensures that the transmission functions properly in a wide variety of operations and provides maximum traction in a wide range of conditions – especially on inclines, rough terrain or extremely slippery surfaces.

What is the best oil for a transfer case?

I would stick with mobil1 or amsoil. That’s just my preference. You can put the same stuff in the t case and front and rear diffs no problem. Another option alot of us are using is Lucas non synthetic 85w 140.

Is transfer case fluid the same as differential fluid?

The transfer case acts like a differential, but channels power to the two differentials on different axles rather than to two wheels on the same axle. As in a gearbox, a differential and transfer case require fluid to lubricate the gears, shafts and bearings where metal slides over metal.

Does transmission and transfer case Share fluid?

Registered. The transfer case uses gear oil, such as 85W90, etc. but there may be a hole for transmission fluid to pass to one side of the oil sealer in the transfer case for lubrications. You need to make sure where the leak come from , what fluid (gear oil or transmission fluid).

How do you know if your transfer case is low on fluid?

If you hear grinding, growling, or humming noises that change with your vehicle speed, it may be coming from the transfer case. This could indicate a low fluid level or some mechanical problem such as bad bearings, loose chains or damaged gears.

What other items do customers buy after viewing this item?

Genuine Chrysler 5016796AC Lubricant-TRANSFERCASE, 32. Fluid_Ounces, 1 Quart , Black

Customers who viewed this item also viewed

Genuine Chrysler 5016796AC Lubricant-TRANSFERCASE, 32. Fluid_Ounces, 1 Quart , Black

Top reviews from the United States

There was a problem filtering reviews right now. Please try again later.

What is the MOPAR part number for 2012?

It has the spec sheet for a 2012 1/2 ton with a BW 44-45 but it list the MOPAR Part # as 68089195AA.

What is Valvoline ATF 4?

Its unique additive package provides the proper frictional properties, excellent low-temperature fluidity and dependable wear protection required in applications where a Chrysler MS-9602 type fluid is recommended.#N#Valvoline ATF + 4 is a uniquely blended automatic transmission fluid that meets Chrysler Material Standard MS-9602. It is designed as a factory fill fluid for all 1998 and later Chrysler Corporation automatic transmissions and transaxles. It is fully compatible with all transmissions that require Mopar ATF +® , Mopar ATF+2TM and Mopar ATF+3TM. Valvoline ATF + 4TM is for use in all applications specifying Mopar ATF+4 or Type MS-9602 fluid.

How to check fluid level on a car?

Fluid level can be checked by removing the filler plug and inserting a finger. The level of the lubricant should not be more than 1/2 in (12 mm) below the bottom of the filler hole while the vehicle is on level ground.

Is Valvoline ATF 4 compatible with Mopar ATF?

It is fully compatible with all transmissions that require Mopar ATF +® , Mopar ATF+2TM and Mopar ATF+3TM. Valvoline ATF + 4TM is for use in all applications specifying Mopar ATF+4 or Type MS-9602 fluid. X.

What is the viscosity of transfer case fluid?

Most Transfer Case fluids are simply boosted ATF’s and have a viscosity of 7.3 to 8.0 cST at 100C (with Toyota being one of the exceptions). According to Amsoil’s PDS for their MV ATF:

Which fluid has a thicker viscosity?

The mopar fluid feels to have a much thicker viscosity compared to the amsoil.

Why not use UTTO fluid?

Do not use a UTTO or other type of fluid simply because the viscosity may be in the neighborhood. Many of the current TC fluids are modified with specific friction modifiers and just happen to be in the same range of ATF viscosities. Another alternative is this: Valvoline TC Fluid Product Specs.

Does Royal Purple have replacement fluid?

Valvoline, Pennzoil, and Royal Purple all state they have no replacement fluid for the BW44-44 transfer case.

Does mopar fluid have thicker viscosity than amsoil?

Miss worded that. The mopar fluid feels to have a much thicker viscosity compared to the amsoil.


Leave a Reply

Your email address will not be published. Required fields are marked *