Drill Bit Hole Diameters | ||
---|---|---|

Metric Size | Fractional Size | |

.3 mm | .0118 | 3/64 |

.4 mm | .0157 | 1/16 |

.5 mm | .0197 | 5/64 |

##
What is the smallest size drill bit?

Letter gauge drill sizes are used primarily in North American with A starting with the smallest size working 26 size increments to Z. The following drill chart covers the smallest standard drill diameter size of strong>1/64 to 21/32 and gives you the equivalent sizes in both decimal inches and millimeters.

##
What are the equivalents of drill size?

Drill Size & Decimal Equivalents. Fract Size Decimal Inches # Size Letter Size Metric Size Fract Size Decimal Inches # Size … 0.0156 0.257 F 0.016 78 0.261 G 0.018 77 17/64

##
How do you find the decimal equivalent of a drill bit?

Drill Bit Decimal Equivalency Chart. For exact decimal equivalent, multiply mm times .03937. For exact mm equivalent, multiply decimal times 25.4.

##
What is the size of a 25/32 diameter drill?

Account DRILL SIZE DECIMAL EQUIVALENT 25/32″ .7812 20.00mm .7874 51/64″ .7969 20.50mm .8071 156 more rows …

##
Which drill bit has the wider flute?

##
Which drill bit is the most wear resistant?

##
What is an uncoated flute bit?

##
What are slow spiral drill bits?

##
What is a short flute drill bit?

##
What is a TiN drill bit?

##
What is a split point in a bit?

##
See 2 more

##
About this website

What number drill bit is 5 64?

Downloadable versions:Drill sizeDiameter (in)Diameter (mm)5/64 in0.07811.9844#470.07851.99392 mm0.07872.0000#460.08102.0574147 more rows

What is a 5/16 drill bit equal to?

5/16 converts to 10/32.

What is equivalent to a 1/2 inch drill bit?

Jobber Length Drill Bit ChartFractional SizesDecimal Equivalent (Inches)Flute Length (Inches)13/64”0.20312-7/16”7/32”0.21882-1/2”15/64”0.23442-5/8”1/4”0.252-3/4”113 more rows

What drill bit is closest to 5 8?

How Many Drill Bit Sizes Are There?1/25/87/89/1611/1615/1637/6445/6461/6419/3223/3231/3239/6447/6463/643 more rows•Feb 22, 2021

What size is 1/8 drill bit?

Drill Bit Hole DiametersMetric SizeFractional Size.6 mm.02383/32.7 mm.02767/64.8 mm.03151/877 more rows

What size bolt fits a 5/16 hole?

Clearance Hole Size for Bolts and Screws (Imperial)Size of ScrewClearance Hole DrillsClose Fit1/40.25000.25705/160.31250.32303/80.37500.386014 more rows•Nov 4, 2021

What does 3/8 mean for a drill?

3/8 inch is the maximum shaft diameter that fits in the chuck. That doesn’t mean you can’t drill larger holes, but the part the drill chuck grips has to be this size or smaller. (Some higher-powered drills have half -inch chucks.)

What is the difference between a 1/2 inch and 3/8 inch drill?

A 3/8-inch drill accepts a wide range of bits, making it versatile for common tasks around the house. A 1/2-inch drill handles heavier applications. Speed: A variable-speed drill with an adjustable clutch gives you versatility for drilling different materials and using a variety of bits.

What size drill bit do I need for a 5’8 bolt?

Tap and Drill Size ChartTHREADSIZEDRILL DIAMETER Coarse ThreadTAP DRILLSIZE7/16-20.390625/641/2-20.453129/649/16-18.515633/645/8-18.578137/6436 more rows

What is the closest size to 5 8?

Metric / Standard Wrench Conversion ChartBolt DiameterMetricStandard5/16″13mm1/2″3/8″14mm9/16″7/16″16mm5/8″1/2″19mm3/4″39 more rows•Apr 9, 2020

What can I use if I don’t have a drill bit?

0:010:47Create a Pilot Hole Without a Drill Bit – YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd I didn’t bring any drill bits with me and she doesn’t have any so an easy trick is if you have aMoreAnd I didn’t bring any drill bits with me and she doesn’t have any so an easy trick is if you have a finishing nail or any type of small nail. And just put it into the Chuck of your drill.

What’s the next size up from 5 16?

Wrenches: Standard Combination Wrenches (1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1)

What size is a number 16 drill bit?

1/32″Drill Bit Size ChartSizeDecimal EquivalentSize690.029211/64″.75 mm0.029517680.0314.40 mm1/32″0.03121647 more rows

What size is a #9 drill bit?

Screw Machine Drill Bit: #9 Drill Bit Size, 44.50 mm Max Drilling Dp, 3/16 in Shank Dia.

What is the largest drill bit size?

This chart rounds out the second half of these number gauge sizes down to #1, which is the largest drill bit size.

How Do You Know What Size Drill Bits You Need?

If you’re an average weekend-warrior, you’ve probably stared at a** screw or bolt ** for a few moments and wondered what size drill bit you would need.

What is the typical drill bit angle?

The typical sizes of drill bit point angles are** 115° or 118° (degrees). **

What size drill is used for letter gauge?

Letter gauge drill sizes are used primarily in North American with A starting with the smallest size working** 26 size ** increments to Z.

How to size screws?

First, you can size screws simply** by inserting them into a hole then reading the marking. **

Can we narrow down a bit?

Thankfully,** we can ** narrow it down a** bit to some standard sized holes and bits. **

Can you use drill chart to convert sizes?

You can use the drill chart that follows this section to help convert sizes, or you can** do the math yourself. **

What is the measurement of drill bits?

Drill bits are available in different materials, lengths, and diameters. Most are measured by the** metric units ** and in the USA it’s imperial units. Drill bit diameter is the most important factor in the drilling process and it should know precisely as much as possible to sharpen or tolerate the diameter.

How many mm is 1 inch?

1 inch is equal to** 25.4 ** mm. By dividing the inches other fractions are introduced. Inches are really popular in the USA but beyond that mostly used the SI units. So we have to interchange the metric units and imperial units.

Which drill bit has the wider flute?

**Parabolic spiral flute ** drill bits have wider flutes for more efficient chip evacuation than spiral-flute bits. Black-oxide drill bits produce less friction than uncoated drill bits. Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated and black-oxide drill bits.

Which drill bit is the most wear resistant?

Titanium-nitride (TiN) coated drill bits last longer and can drill at higher speeds than uncoated drill bits.** Titanium-aluminum-nitride (TiAlN) coated drill ** bits are the most wear and temperature resistant for the longest life and highest drilling speeds.

What is an uncoated flute bit?

Uncoated. Also known as reverse-flute bits,** the flutes spiral in the opposite direction of other bits. ** Use in counterclockwise drilling applications such as removing broken screws. These bits are jobbers’ length and have the rigidity and length required for most applications.

What are slow spiral drill bits?

Also known as slow-spiral drill bits. They are** jobbers’ length and have the rigidity and length ** required for most applications.

What is a short flute drill bit?

Short-Flute Cobalt Steel Drill Bits. The** short flutes on these jobbers’ -length bits provide increased rigidity for drilling straighter holes. ** Made of cobalt steel, which has better heat and wear resistance than high-speed steel, they can run up to 25% faster and have a longer tool life.

What is a TiN drill bit?

Titanium-aluminum-nitride (TiAlN) coated drill bits are** the most wear and temperature resistant for the longest life and highest drilling speeds. **

What is a split point in a bit?

A** split point keeps the bit centered without a pilot hole. **