A premium anti-wear (AW) 46 oil, for example, has a temperature range of 14 to 104 degrees F, while Deere’s Super EX 46HN has a temperature range of -4 to 104 degrees F. For low-temperature operation, Deere recommends its zinc-free Daphne Super Hydra A 32 (-22 to 86 degrees F) or an equivalent premium AW 32 oil.
What is Hitachi Super Ex 46hn?
Hitatchi Super Ex 46HN is an Advanced Hydraulic Oil for improved performance, increased protection and lower cost. In this cross reference tool, PSC offers Hitachi Super EX 46HN and/or equivalent products of the similar quality and performance.
What do the numbers on hydraulic fluid mean?
ISO VG – ISO Grade (International Standards Organisation) – the higher the VG number the more viscous the fluid is. This tells you which hydraulic oil is thicker. This is sometimes referred to as the hydraulic oil weight. Grades with a W next to them indicate the weight (Unlike automobile engine oil which refers to winter oil).
What grade of hydraulic fluid should I use?
The ISO grade (32, 46, 68) fluid to be used should fall within the range of the optimum cSt listed in the right-hand column of the spec sheet.’ Hydraulic Oil Grades Explained | How to Select the Right Hydraulic Oil | Everything you need to know about Hyd Fluid
What type of hydraulic oil should I use with my Hitachi?
Most Hitachi equipment comes with our genuine hydraulic oil when shipped from the factory. You should continue to use Hitachi genuine hydraulic oil to get maximum performance from your equipment, and also to reduce your hydraulic oil cost.
What is 46HN hydraulic oil?
A non-sludge-type, heat-resistant, wear-resistant, long-life hydraulic fluid prepared with a combination of a non-zinc, ashless extreme-pressure additive and a variety of antioxidants. 46HN matches the hydraulic factory-fill product for all metric excavator models, both John Deere and Hitachi.
What kind of hydraulic fluid does a John Deere excavator use?
Suitable For Use In John Deere Excavator: Hydraulic ISO 46 – 15w/40 Engine Oil – EP80w/90, 85w/140 Gear Transmission.
What weight is ISO 32 hydraulic oil?
Enhance your purchaseMaterialParaffinic Base OilLiquid Volume200 LitersItem Weight426 PoundsRecommended Uses For ProductIndustrialViscosityISO VG 32
What weight is ISO 15 hydraulic oil?
Hydraulic oil 15 specifications Density (Kg/L): 0.860. Viscosity (cSt at 40°C): 16.2. Viscosity (cSt at 100°C): 3.40. VI: 78.
What grade is John Deere hydraulic oil?
Hy-Gard and low-viscosity Hy-Gard transmission and hydraulic oils are unique oils developed by John Deere engineers to meet the exact needs of John Deere machines. Both Hy-Gard fluids are multi-viscosity fluids with high-viscosity index. Low-Viscosity Hy-Gard has an ISO 32 viscosity grade.
Is AW 46 hydraulic oil the same as ISO 46?
AW 46 hydraulic fluids have an International Standards Viscosity Grade or ISO VG of 46. This is the thickness of the fluid tested at 40 degrees Celsius. ISO VG 46 is the most popular grade due to its middle grade flow properties with a thickness that is equivalent to a SAE 15 weight lubricant.
Can you mix ISO 32 and ISO 46 hydraulic oil?
Yes as above no problems mixing them.
Is ISO 32 the same as AW 32?
Anti-wear grades These oils perform at the same grade as their ISO counterparts. An AW 32 hydraulic oil is going to be at 32cSt at 40°C for instance. The difference here is that there are additives contained within the oil.
What does ISO mean in oil?
International Standards Organization Viscosity GradeISO VG stands for “International Standards Organization Viscosity Grade” and is reported in numbers ranging from 2 all the way up to 1500. This number is critical because a lubricant’s viscosity is the single most important factor when selecting the right oil for your machinery.
Can you use 15w40 as hydraulic oil?
Mobil Agri Super™ 15W-40 is a high performance, multi-functional lubricant for most farm equipment applications. This STOU lubricant provides good performance in diesel and gasoline engines, transmissions, hydraulics, final drives and oil-immersed brakes operating in agricultural service.
What weight is universal hydraulic fluid?
Universal Tractor Hydraulic Fluid is a SAE viscosity grade 10W-30 and meets API GL-4 gear oil specifications.
What weight is j20a hydraulic fluid?
624 ozAdditional informationWeight624 ozDimensions12 × 15.5 × 12 inSize5 Gallon Pail, 16 Gallon Pail, 55 Gallon Drum
How much oil does a John Deere 35d take?
Engine Oil with Filter 3.1 L (3.3 qt.) Hydraulic Tank 20.2 L (5.3 gal.) 0.93-m (3 ft. 1 in.)
What kind of oil does a John Deere tractor use?
You’re in the right place to learn about John Deere Plus-50™ II Engine Oil – including our brand new line of SAE 5W-40. Check out how Plus-50™II oil is specially formulated to keep engines running smoothly and efficiently. In tractors.
What kind of hydraulic fluid does a Hitachi excavator use?
Hitachi genuine hydraulic (46HN) oil is specially designed for use in our equipment. It will keep your equipment functioning at peak levels, will protect hydraulic components from wear, and will reduce your oil cost, thanks to its long life (4,000 hours*). *If not mixed with other brands.
What kind of hydraulic fluid does a Komatsu excavator use?
Komatsu hydraulic oil is a zinc-based anti-wear fluid with proven performance in off-road, as well as stationary equipment. Komatsu hydraulic oil is a zinc-based anti-wear fluid with proven performance in off-road, as well as stationary equipment.
What is heavy duty hydraulic oil?
Heavy-duty hydraulic oil is necessary for high-pressure environments where the fluid needs to be able to cope with large amounts of stress. The hydraulic oil additives used here will typically contain anti-wear properties. Anti-wear hydraulic oil is one of the most common blends used in industry and construction.
What is the viscosity index of hydraulic oil?
Hydraulic oil viscosity index. To measure the change in viscosity of hydraulic oil when the temperature changes, we use the oil viscosity index (VI). If a hydraulic oil has a low viscosity index, a change in temperature will alter the viscosity more than if it has a high viscosity index.
What is biodegradable hydraulic oil?
Biodegradable hydraulic oil is used in applications where an oil spill or leak could potentially contaminate the environment. The typical base oil for biodegradable versions of hydraulic oil include rapeseed oil and some other vegetable oils.
What type of oil is used for a car lift?
Hydraulic oil for a car lift tends to have a higher viscosity grade for high pressure. Hydraulic Oil for Wright Standers – A wright stander is a stand on mower which is usually well-suited to cemeteries and other restrictive grassy areas. The hydraulic part of these machines requires hydraulic oil for power.
Why is anti-freeze used in hydraulic fluid?
Hydraulic power is required in some of the coldest places on earth. In these cases, anti-freeze additives are used to prevent the fluid from freezing up or waxing. Low-temperature hydraulic oil is commonly used as a name for fluid which needs to be used in icy conditions.
What is hydraulic oil used for?
The primary use of hydraulic oil is to transfer power within hydraulic systems. When a force is applied to the non-compressible hydraulic fluid, usually from a piston within a cylinder, the oil is pushed through the hydraulic system and ultimately produces a force on another part of the system.
Why do we use hydraulic oil?
Hydraulic oil is used aboard many marine vessels for the stabilisers. The stabilisers reduce the amount of roll, which can affect the ship’s balance and cause you to experience unfriendly sea-motion sickness. This is just one of the many other applications on marine vessels which require hydraulic oil.
How long should hydraulic lubricant be warm?
Step 1. Operate the hydraulic system under normal operating temperature and conditions for minimum of 1 hour. Then shut the hydraulic system down. The lubricant in the system should be warm/hot when initiating the lubricant change.
What is the best procedure for a hydraulic system?
Procedure A is considered the “best” and involves a complete drain and flush of the system. With any switch to a new product a complete flush will provide the full benefit of the Clarity Synthetic Hydraulic Oil’s performance in theapplication.
What is clarity oil?
Clarity Hydraulic oils are designed for use in mobile and fixed plant hydraulic vane-, piston-, and gear-type pumps. The protection provided by these oils make them especially suited for high performance industrial applications utilizing axial piston pumps where pressures may exceed 5000 psi.
Is JCMAS HK water emulsifying?
The JCMAS HK specification does not state whether the oil used is water emulsifying or demulsifying. Our Clarity Synthetic Hydraulic Oil AW line is formulated to have excellent demulsibility characteristics (water separation). If water content is determined to be above 1000 ppm, measures should be taken (as with any hydraulic fluid) to remove the water contamination to prevent degradation of additives and base fluids.
Which chemo meets ISO 46?
Mobil M-46, Castro zz and Chevron Clarity meets the ISO 46 with zinc free.
What is zincless oil?
As long as it is to an ashless (non zinc) product. Click to expand… From my understanding, the zincless oils are for units with sensitive copper and silver parts. The zinc acts as a metallic particles and tears up the copper and silver lined parts.
What does tha mean on Hitachi?
Not sure if the Hitachi specs are the same, I’ll check. Tha means that a complete system cleanse is in order. That’s a lot of hose couplings…
Does SAE60 work on 777F?
All our dozers and large haul trucks use SAE60 FD-1 in front wheels, final drives, & diffs but we found that didn’t work in 777F’s. We had to switch back to SAE50 TO-4 because the oil analysis on the 777 rear ends was really bad at higher hours on the FD-1 and it didn’t go away with dialysis. Changing to SAE50 fixed the problem.
Is nige oil zinc free?
Nige is spot on. However zinc free hyd oils are not that difficult to find. Most oil companies advertise them as ashless hydraulic oils.
