2014A aluminium is a readily available high strength grade of commercial aluminium. The aerospace equivalents are L93 (plate), L157 (sheet) and L168 (bar). Supplied in a fully heat-treated condition, 2014A is a 4-5% copper alloy.

Full
Answer

What is 2014a aluminium alloy?

2014A aluminium alloy offers good machinability and retains its strength after heat-treatment. 2014A is ideal for manufacturing high-strength components. Site Search: 0845 527 3331 info@smithmetal.com Toggle navigation Home Materials • Aluminium • Beryllium Copper • Brass • Bronze • Copper • Engineering Plastics • Magnesium

What is the aerospace equivalent of 2014a?

The aerospace equivalents are L93 (plate), L157 (sheet) and L168 (bar). Supplied in a fully heat-treated condition, 2014A is a 4-5% copper alloy. The most common temper is T651 (except under 10mm and over 203.2mm diameter which is supplied in T6 only) which is solution heat treated, stress relieved by stretching then artificially aged.

What is the difference between 2014 and 2014a?

Prior to the adoption of The Aluminum Association alloy designations in 1954, 2014 was known by the industry conventional designation “14S”. The alloy composition of 2014 is: 2014A is an alloy of aluminium that is very similar (but not entirely identical) to 2014.

Should I paint my 2014 aluminium?

If unclad 2014 aluminium is to be exposed to the elements, it should be painted as a corrosion protection measure. Prior to the adoption of The Aluminum Association alloy designations in 1954, 2014 was known by the industry conventional designation “14S”. The alloy composition of 2014 is:

What is 2014 Aluminium alloy used for?

2014A is used widely in the aerospace and defence sector in the manufacture of high strength components. 2014A aluminium alloy is normally stocked in the T651 condition and is produced in extruded bar or profile form. Resistance to atmospheric attack is poor.

What is HE15 aluminium?

Aluminium Alloy 2014 HE15(2014 A) is a copper based alloy with very high strength together with excellent machining characteristics. Aluminium Alloy 2014 HE15 is commonly used in many aerospace structural applications due to its high strength.

What is 3000 series aluminum used for?

3000 Series is mixed with manganese and is very “formable” and heat treatable. This aluminum alloy is often used for cookware and heat exchangers in power plants and vehicles.

What is HE30 aluminium?

Aluminium alloy 6082 / HE30 is a medium strength alloy with excellent corrosion resistance. It has the highest strength of the 6000 series alloys. Aluminium Alloy 6082 / HE30 is known as a structural alloy. In plate form, Aluminium Alloy 6082 / HE30 is the alloy most commonly used for machining.

What is 7000 series aluminum used for?

Aluminum alloys Aluminum alloy 6061 and alloys of the 7000 series are most commonly used in the production of bicycle frames (Easton Sports).

What is 8000 series aluminum used for?

The 8000 series use additions of silicon, iron, copper, magnesium, zinc and boron to improve properties while maintaining high conductivity. Aluminum 8000 series alloys provide good strength combined with high conductivity.

What is 6000 series aluminum used for?

Uses of this form of 6000 series alloy include applications from transportation, to infrastructure to more every day uses like fly fishing reels, firearm suppressors, non-flight critical aircraft components and automotive components. 6061 is available in many forms, including extrusion sheets, and forgings.

What is better 6061 or 7075 aluminum?

7075 aluminum alloy has a higher yield strength than 6061 aluminum. Consequently, 7075 aluminum is able to withstand more pressure and more impact without deformation. The yield strength of 7075 aluminum is due to its chemical composition and heat treatment.

What does T6 stand for in aluminum?

The T6 refers to the temper or degree of hardness, which is achieved by precipitation hardening. This grade has a good strength-to-weight ratio and is also heat-treatable. With great formability and weldability, it is used for engineering and structural applications, boats, furniture, and more.

What is the difference between 6061 and 6082?

As a relatively new alloy, the higher strength of 6082 has seen it replace 6061 in many applications. The addition of a large amount of manganese controls the grain structure which in turn results in a stronger alloy. It is difficult to produce thin walled, complicated extrusion shapes in alloy 6082.

Can you weld 3000 series aluminum?

3000 Alloys: A collection of medium-strength aluminum alloys. They are very formable and are often used for heat exchangers and air conditioners. 3000 series aluminum alloys are readily weldable with either 4043 or 5356 filler metal.

Is 3000 series aluminum heat treatable?

3000 series Aluminum alloys are Aluminum alloyed with manganese. They have higher strength than pure aluminum while maintaining good formability and corrosion resistance. These alloys are not heat treatable and are suitable for anodizing and welding.

What are aluminum alloys used for?

Aluminium alloys are widely used in the fields of electric module packaging, electronic technology, automotive body structure, wind and solar energy management, due to the advantages of high specific strength, high processability, predominantly anti-erosion, increased conductivity, eco-friendly nature and …

Which aluminum alloys are weldable?

6 Common Aluminum Alloys for WeldingAlloy DesignationAdvantages5083High weld efficiency and very high joint strength. Good corrosion resistance.5454Moderate-to-high strength, excellent weldability.6061Good all-around alloy.6063Medium strength and good corrosion resistance, weldability, and workability.2 more rows

What is 2014 alloy?

2014 aluminium alloy. From Wikipedia, the free encyclopedia. Jump to navigation Jump to search. 2014 aluminium alloy (aluminum) is an aluminium -based alloy often used in the aerospace industry. It is easily machined in certain tempers, and among the strongest available aluminium alloys, as well as having high hardness.

Is 2014 aluminum a corrosion resistant material?

It is commonly extruded and forged. The corrosion resistance of this alloy is particularly poor. To combat this, it is often clad with pure aluminium. If unclad 2014 aluminium is to be exposed to the elements, it should be painted as a corrosion …

Is 2014A the same as 2014A?

2014A is an alloy of aluminium that is very similar (but not entirely identical) to 2014. Because of the naming similarity, the two can be confused. The alloy composition of 2014A is:

What is L168 – 2014A used for?

Aluminium alloy L168 – 2014A is a very high mechanical strength alloy used for critical applications and is the most widely used aluminium bar alloy in the aerospace industry.#N#It has very good machinability and is thus used for the production of complex machined parts.

Does material supplied by the Company vary significantly from this data?

Material supplied by the Company may vary significantly from this data, but will conform to all relevant and applicable standards.

What is 2014A aluminum?

2014A aluminium is a readily available high strength grade of commercial aluminium. The aerospace equivalents are L93 (plate), L157 (sheet) and L168 (bar). Supplied in a fully heat-treated condition, 2014A is a 4-5% copper alloy. The most common temper is T651 (except under 10mm and over 203.2mm diameter which is supplied in T6 only) …

What is L168 in aerospace?

L168 is the most widely used aluminium bar alloy in the aerospace industry .

Is Penta Precision accurate?

Penta Precision supplies highly accurate 2014A machined parts throughout the UK. Customers turn to us when they have had quality and delivery issues with their existing suppliers and need a reliable precision machining partner.

Overview

2014 aluminium alloy (aluminum) is an aluminium-based alloy often used in the aerospace industry.
It is easily machined in certain tempers, and among the strongest available aluminium alloys, as well as having high hardness. However, it is difficult to weld, as it is subject to cracking.
2014 is the second most popular of the 2000-series aluminium alloys, after 2024 aluminium alloy. It is commonly extruded and forged. The corrosion resistance of this alloy is particularly poor. T…

Chemical Composition

2014A Aluminium Alloy

Properties

Standards

Further reading